Hi,

I have not had success trying to find these two maps KRMXN and VNMX. I need VNMX for making launch deactivate earlier and KRMXN to limit knock retard because due to testing we have found that its happening due to external noise.

File attached:
-> Contents of ECUID data table:
   - '0261208524'         (SSECUHN)         
   - '1037372505'         (SSECUSN)         
   - '8E0909518AQ '       (VAG part number)
   - '0010'               (VAG sw number)   
   - '1.8L R4/5VT    '    (engine id)       
-> Contents of ECUID data table:
   - 'HW_MAN004

If you have a nice mappack you can share or only addresses for these maps would greatly help.

I got a full damos for it! Thanks a lot though very appreciated! The damos doesn't have KFDLULS... I need to max it out... lol any help with that?

My friend the tune is been done properly but the problem is the turbo actuator is very weak and its causing pressure drop at high rpm no matter how I tune PID. So I want to max this out so I can request a bit more to keep n75 at 95%. And so we can eliminate this issue even if his turbo starts failing more than now.

KLDLUL is KFDLULS on this file"?

I am requesting more load than the actual realistic pressure available from this turbo with weak actuator because I want to keep pressure at around 10psi by redline which is very hard with anything less than 90% duty.

Thanks a lot my friend! Very weird why is it named NSTOEL in my damos? Here look. So just max this map out then?

I found KLDLUL thanks a lot my friend! The next problem we found is malfuncitoning Coolant Temp sensor (which will cause a lot of bad things with the tune because more than 100 maps operate with coolant temperature maybe even more).