Pages: [1]
Author Topic: High idle for faster warmup  (Read 2440 times)
mushtafa
Full Member
***

Karma: +3/-4
Offline Offline

Posts: 121


« on: December 05, 2019, 01:18:04 PM »

Had a thought, not sure how it's best approached though;

On cold mornings, it would be nice to have the idle sit at 2k for example to help the car warm up and defrost quicker, but as soon as the throttle is touched it'll return to it's normal idle speed.

I assume this would require custom code? Any thoughts? ME7.5
Logged
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1282



« Reply #1 on: December 05, 2019, 01:42:44 PM »

Had a thought, not sure how it's best approached though;

On cold mornings, it would be nice to have the idle sit at 2k for example to help the car warm up and defrost quicker, but as soon as the throttle is touched it'll return to it's normal idle speed.

I assume this would require custom code? Any thoughts? ME7.5

It already does from 1.3k to 800~.
Logged
mushtafa
Full Member
***

Karma: +3/-4
Offline Offline

Posts: 121


« Reply #2 on: December 05, 2019, 03:49:02 PM »

I want it higher to warm the car quicker, but 2k rpm idle would be a pain to drive with. I'd wan't it to revert back to the usual cold start idle map once the car is driven
Logged
prj
Hero Member
*****

Karma: +1072/-480
Offline Offline

Posts: 6035


« Reply #3 on: December 06, 2019, 02:00:48 AM »

Install a pre-heater instead of raping the engine.
Idling the engine to warm it up absolutely wrecks piston rings and causes oil consumption.
It's supposed to be driven lightly. That way it warms up faster and spends less time working cold -> less fuel consumption, less engine wear.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)