Pages: [1]
Author Topic: Lower boost by 2-3psi  (Read 3305 times)
pumpercloggs
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« on: March 25, 2012, 06:24:32 PM »

Currently on a stage 3 mbox file boosting to 25-26psi - could someone point me in the right direction for lowering teh n75 duty cycle to bring this down to 22?

THanks
Logged
julex
Hero Member
*****

Karma: +79/-4
Offline Offline

Posts: 923


« Reply #1 on: March 25, 2012, 06:30:05 PM »

kfldimx table

Assuming your boost comes down on its own pretty quick after overboost. If it still hovers high, you will have to change limits etc which
i would advise to spend some time reading this forum about.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 17 queries. (Pretty URLs adds 0s, 0q)