04 Allroad winter beater

Pages: [1]

« previous next »

Author

Topic: 04 Allroad winter beater (Read 4679 times)

th3cavalry

Newbie

Karma: +1/-0
Offline

Offline

Posts: 11

	04 Allroad winter beater « on: December 18, 2019, 07:28:34 PM »

Hey all! I bought a completely stock 04 Allroad tip for a decent price. It's clean in and out. I'm going to do valve cover gaskets soon and replace the driver side level sensor.

The car is throwing codes for rear 02 and EGT sensors so I'm wanting to just code them out. I get the basics and I feel like I know what to do.

The issue I have is a 551S ECU. I've read about flashing 551R software because of the S getting stuck in programming mode. Do I need to go into boot mode to do that or can I just flash the R and be done with it? It also seems like the R has better definition files.

I'm not looking to tune it or anything right now. Once I finish my Barra swapped mustang, then I'll start playing with the AR. Just want to code out the extra bullshit and remove the hardware as time goes on.

The car will only driven if it's snowing or if my TDI is down.

Any advice?

Sent from my Pixel 3a XL using Tapatalk


	Logged

prj

Hero Member

Karma: +1072/-480
Offline

Offline

Posts: 6035

	Re: 04 Allroad winter beater « Reply #1 on: December 19, 2019, 02:42:49 AM »

If you disable the EGT function without changing the fueling strategy of the ECU, you have the potential to kill the engine.
Harder to do on the lower powered 2.7TT, a lot easier on the RS4.


	Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches

_nameless

Hero Member

Karma: +342/-466
Offline

Offline

Posts: 2802

	Re: 04 Allroad winter beater « Reply #2 on: December 19, 2019, 07:06:52 AM »

Quote from: th3cavalry on December 18, 2019, 07:28:34 PM

Any advice?

read the wiki


	Logged

Giving your mom a tuneup

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12268

	Re: 04 Allroad winter beater « Reply #3 on: December 19, 2019, 10:07:17 AM »

Moved. You misapprehend the purpose of this forum.


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

th3cavalry

Newbie

Karma: +1/-0
Offline

Offline

Posts: 11

	Re: Re: 04 Allroad winter beater « Reply #4 on: December 19, 2019, 06:14:49 PM »

Quote from: Marty on December 19, 2019, 07:06:52 AM

read the wiki

I'm more asking about going from 551s to 551r. Sorry if I wasn't clear. I've searched but I seemed to have missed a definite answer.

Sent from my Pixel 3a XL using Tapatalk


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12268

	Re: 04 Allroad winter beater « Reply #5 on: December 19, 2019, 07:13:38 PM »

Unfortunately, you MAY have to do boot mode after flashing from S to R still.

I recommend having a *verified* working bootmode setup before attempting it.

In theory, it should work, but I have seen cases where the ECU has bricked.


	Logged

th3cavalry

Newbie

Karma: +1/-0
Offline

Offline

Posts: 11

	Re: Re: 04 Allroad winter beater « Reply #6 on: December 19, 2019, 07:16:02 PM »

Quote from: nyet on December 19, 2019, 07:13:38 PM

Thank you. I'll research the type of cable I need and what needs to be hooked up.

I just need to boot flash it once? Then I can just use OBDII and nedmoto to upload changes afterwords?

Sent from my Pixel 3a XL using Tapatalk


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 25, 2024, 08:08:27 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search