Pages: 1 [2]
Author Topic: 1.8T A4 B6 AVJ melted piston  (Read 9041 times)
prj
Hero Member
*****

Karma: +903/-420
Offline Offline

Posts: 5789


« Reply #15 on: January 14, 2020, 07:51:13 AM »

NA engine goes richer too. Yes on LPG (unless you run liquid injection), you should never enrich past 0.9.
Higher EGT.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
Black_A4
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 51


« Reply #16 on: January 15, 2020, 12:08:52 AM »

Thanks prj! Is there a rough guidance how much the timing can be advanced? Or can this only be done properly on a dyno?
Logged
prj
Hero Member
*****

Karma: +903/-420
Offline Offline

Posts: 5789


« Reply #17 on: January 15, 2020, 03:01:27 AM »

On low load areas only on dyno.
Depending on the boost you run it is possible that on higher load also you will not have any knock limit and finding the correct timing will only be possible on the dyno.

I recall having to add a lot at low RPM and not having to add almost anything at high RPM, but this doesn't really help much - need to cell-by-cell dyno tune it.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
Black_A4
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 51


« Reply #18 on: January 15, 2020, 05:15:02 AM »

Thanks again!
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 17 queries. (Pretty URLs adds 0s, 0q)