1.8T A4 B6 AVJ melted piston

Pages: 1 [2]

« previous next »

Author

Topic: 1.8T A4 B6 AVJ melted piston (Read 10429 times)

prj

Hero Member

Karma: +1072/-481
Offline

Offline

Posts: 6037

	Re: 1.8T A4 B6 AVJ melted piston « Reply #15 on: January 14, 2020, 07:51:13 AM »

NA engine goes richer too. Yes on LPG (unless you run liquid injection), you should never enrich past 0.9.
Higher EGT.


	Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches

Black_A4

Full Member

Karma: +1/-1
Offline

Offline

Posts: 51

	Re: 1.8T A4 B6 AVJ melted piston « Reply #16 on: January 15, 2020, 12:08:52 AM »

Thanks prj! Is there a rough guidance how much the timing can be advanced? Or can this only be done properly on a dyno?


	Logged

prj

Hero Member

Karma: +1072/-481
Offline

Offline

Posts: 6037

	Re: 1.8T A4 B6 AVJ melted piston « Reply #17 on: January 15, 2020, 03:01:27 AM »

On low load areas only on dyno.
Depending on the boost you run it is possible that on higher load also you will not have any knock limit and finding the correct timing will only be possible on the dyno.

I recall having to add a lot at low RPM and not having to add almost anything at high RPM, but this doesn't really help much - need to cell-by-cell dyno tune it.


	Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches

Black_A4

Full Member

Karma: +1/-1
Offline

Offline

Posts: 51

	Re: 1.8T A4 B6 AVJ melted piston « Reply #18 on: January 15, 2020, 05:15:02 AM »

Thanks again!


	Logged

Pages: 1 [2]

« previous next »

Jump to:

Navigation

Personal Tools

November 27, 2024, 12:38:58 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search