Pages: 1 [2]
Author Topic: Disabled Boot mode  (Read 8374 times)
danzzon
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 27


« Reply #15 on: February 07, 2020, 12:01:06 AM »

Here is a pic of the mainboard
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Online Online

Posts: 12232


WWW
« Reply #16 on: February 07, 2020, 12:35:24 AM »

dont take the ground from the battery. Find a real ground on the board itself.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
BlackT
Hero Member
*****

Karma: +79/-39
Offline Offline

Posts: 1415



« Reply #17 on: February 07, 2020, 12:45:29 AM »

Can you describe full proces how you try to enter boot mode? I think you are doing something wrong
Logged
danzzon
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 27


« Reply #18 on: February 07, 2020, 01:30:26 AM »

Remove positive/ground from power source to ecu ive tried both, ground pin 24 with separate cable to battery, connect power to the ecu, hold ground on pin 24 for 2, 5, 10, 20, 30 sec tried all of them
Logged
prj
Hero Member
*****

Karma: +903/-420
Offline Offline

Posts: 5789


« Reply #19 on: February 07, 2020, 02:10:42 AM »

If you were grounding the pin direct to battery, chances are your processor is already fried on both ecu's.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
danzzon
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 27


« Reply #20 on: February 07, 2020, 03:06:35 AM »

Ive been doing that on my old ecu for quite sometime and has worked like a charm before
Logged
danzzon
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 27


« Reply #21 on: February 07, 2020, 03:09:13 AM »

So maybe try bootmode by grounding on the side of the mainboard?
Logged
danzzon
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 27


« Reply #22 on: February 07, 2020, 07:23:07 AM »

Whats a good ground reference on the board then ? xD
Logged
danzzon
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 27


« Reply #23 on: February 08, 2020, 05:58:12 AM »

Ok so ive now tried anything i can think of!

As you guys said i tried to ground it on another spot instead of right on the battery terminal, tried the side of the mainboard tried on backside of pin 1 main ground.

Tried MPPS, Galletto, tried to verify its in bootmode in Nefmoto, tried Argdubs, nothing. Tried 2 different wiring harnesses one with wires connected to each pin and one complete harness, nothing.

Im really curious as to what is going on right now and ive seen some other folks post about this issue on the forum but doesnt seem like anybody has found an answer to the problem.

Im willing to try anything that anyone have to suggest, only thing i know im not doing is using a resistor to the ground but that shouldnt be an issue right?

Hopefully someone can help with this as the car is stranded..
Logged
prj
Hero Member
*****

Karma: +903/-420
Offline Offline

Posts: 5789


« Reply #24 on: February 11, 2020, 10:24:07 AM »

You either already fried the ECU or the problem is with your cracked shit tools or your computer.

Simple.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 17 queries. (Pretty URLs adds 0s, 0q)