Pages: [1]
Author Topic: MED 9.1 retrieving SKC for key programming from ECU dump  (Read 252 times)

Karma: +0/-0
Offline Offline

Posts: 1

« on: February 14, 2020, 11:53:41 PM »

Hi all,

First post, but been reading so many posts from here over a year or so.  I love tinkering with cars and am a software developer by trade (although not embedded for my day to day).

I purchased a Golf V GTI (2005) and the key has been stolen (only 1).  I have replaced the barrel from another car and have it all working except the immo.  I have purchased some new transponders and some tools bdm100 / vagtacho.  The VagTacho I have shows wrong seed key when trying to connect to the dash.  The dash is the top of the line and so different from my other GTI's.  Has the full red screen. 

I am able to get the full ECU dump flash/eeprom.  Is there a way to retrieve the SKC/Pin required by VCDS to program the transponder with the key?

It seems most people go for immo off, but the ECU / DASH are the original, only the key needs programming.

Hero Member

Karma: +48/-28
Offline Offline

Posts: 1203

« Reply #1 on: February 17, 2020, 05:02:01 AM »

should work
Pages: [1]
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 17 queries. (Pretty URLs adds 0s, 0q)