Pages: [1]
Author Topic: me7.1.1G (022906032EG) mk4 R32  (Read 4395 times)
ARJ0019
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 18


« on: March 17, 2020, 01:06:19 PM »

I would really appreciate a xdf/A2L/Damos or similar file for the mk4 R32 me7.1.1G (022906032EG). There seems to be much less support for the mk4 r32 on here compared to cars like the s4 and 1.8t's, so I'm having trouble finding what I need. Currently the best I have is marty's mk4 r32 .hex and .dam (http://nefariousmotorsports.com/forum/index.php?topic=14575.0) that I used to generate a .kp, but it appears to be incorrect. In the photo attached below you can see what is suppose to be the KFZW timing map, but the axis appear to have some incorrect values in it (specifically the 1.5 and 1.75). I have also attached an oem mk4 r32 022906032EG .bin, which is what my car runs.
Logged
_nameless
Hero Member
*****

Karma: +342/-466
Online Online

Posts: 2802



« Reply #1 on: March 17, 2020, 08:16:23 PM »

using the wrong map pack on your file wont do anything for you. you need to compare your file to the defined file. look for the map you want then look for bit strings in hex or shapes in 2d that are close to yours. use common sense (example if you find kfz your file has 4 of them). ive read all your post and youre still not trying hard enough and youre asking for handouts. ill toss you a bone this time only prokon starts at xxx and eskonf starts at xxxx. besides that you should be able to find larger maps on your own (kfz, lamfa kfped etc) if not you may wanna take a step back and do some more reading or find an alternative solution


edit - spoon feeding gets you no place, sorry.  
« Last Edit: March 18, 2020, 04:13:50 AM by Marty » Logged

Giving your mom a tuneup
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12270


WWW
« Reply #2 on: March 17, 2020, 10:38:37 PM »

Ihere seems to be much less support for the mk4 r32 on here compared to cars like the s4 and 1.8t's

You seem to not understand why this is.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
ARJ0019
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 18


« Reply #3 on: March 18, 2020, 08:18:48 AM »

You seem to not understand why this is.
Besides there only being 5000 of them in the USA, I have also read that the me7.1.1G is more complicated than the rest of the me7 ecu's. I forget where I read that, but I think it was on here.

Sent from my Pixel 3a using Tapatalk

Logged
ARJ0019
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 18


« Reply #4 on: March 18, 2020, 08:25:37 AM »

using the wrong map pack on your file wont do anything for you. you need to compare your file to the defined file. look for the map you want then look for bit strings in hex or shapes in 2d that are close to yours. use common sense (example if you find kfz your file has 4 of them). ive read all your post and youre still not trying hard enough and youre asking for handouts. ill toss you a bone this time only prokon starts at xxx and eskonf starts at xxxx. besides that you should be able to find larger maps on your own (kfz, lamfa kfped etc) if not you may wanna take a step back and do some more reading or find an alternative solution


edit - spoon feeding gets you no place, sorry.  
What your saying makes sense, and it is what I planned on doing if I could not find a complete map pack that would work. The reason I asked first is because I see no reason to redo work that may have already been done. I do appreciate your previous post of the mkiv R32 .hex and .dam, and I will do my best to utilize them to generate my own map pack. Once I do this, I'll post it on here for others to critique and possibly use if they want to. After seeing the little support for the me7.1.1G and the R32 in general, I plan on sharing everything I do to hopefully change that.

Sent from my Pixel 3a using Tapatalk

Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12270


WWW
« Reply #5 on: March 18, 2020, 09:25:24 AM »

Besides there only being 5000 of them in the USA, I have also read that the me7.1.1G is more complicated than the rest of the me7 ecu's. I forget where I read that, but I think it was on here.

No, its because tuning N/A motors is generally not worth the effort.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
ARJ0019
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 18


« Reply #6 on: March 18, 2020, 09:50:11 AM »

No, its because tuning N/A motors is generally not worth the effort.
I think in general that's correct, but that doesn't mean there is no value to it. Removing emissions items seems to be a pretty common request, and it is very difficult and expensive (at least for the R32) to find a premade tune that will get rid of things like SAI and Rear O2.

The main reason I'm learning all of this is because I could not find an R32 tune with emissions delete that was in my budget. I'm designing a custom exhaust with vacuum actuated cutouts in it. When they loose vaccum (WOT) the car will essentially be straight piped. No cats, no resonator, no muffler. But to do this I need to get rid of the rear O2. Figured I might as well get rid of SAI while im at it because it's broken.

Sent from my Pixel 3a using Tapatalk

Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 17 queries. (Pretty URLs adds 0s, 0q)