4B0906018DC conversion topic

Pages: [1]

« previous next »

Author

Topic: 4B0906018DC conversion topic (Read 10746 times)

masterj

Hero Member

Karma: +62/-5
Offline

Offline

Posts: 1049

	4B0906018DC conversion topic « on: April 03, 2012, 03:28:40 PM »

Hey guys!
Could you give me details on hardware differences between audi 8N0906018F and vw 4B0906018DC ? Would it be possible to convert 4B0906018DC to 8N0906018F ?


« Last Edit: June 02, 2012, 03:52:32 AM by masterj »	Logged

ME7Tuner Wizard

gremlin

Hero Member

Karma: +196/-9
Offline

Offline

Posts: 653

	Re: HW Difference between 8N0906018F & 4B0906018DC « Reply #1 on: April 04, 2012, 03:55:49 PM »

Quote from: masterj

Could you give me details on hardware differences between audi 8N0906018F and vw 4B0906018DC ? Would it be possible to convert 4B0906018DC to 8N0906018F ?

No chances.
Too many differencies in HW.
018F board for reference...


« Last Edit: April 04, 2012, 04:06:43 PM by gremlin »	Logged

masterj

Hero Member

Karma: +62/-5
Offline

Offline

Posts: 1049

	Re: HW Difference between 8N0906018F & 4B0906018DC « Reply #2 on: April 06, 2012, 07:12:28 AM »

Any other SW that I could convert to? (for which there are completely defined ols/damos/kp)?


	Logged

ME7Tuner Wizard

gremlin

Hero Member

Karma: +196/-9
Offline

Offline

Posts: 653

	Re: HW Difference between 8N0906018F & 4B0906018DC « Reply #3 on: April 08, 2012, 06:16:06 PM »

Quote from: masterj on April 06, 2012, 07:12:28 AM

Any other SW that I could convert to? (for which there are completely defined ols/damos/kp)?

Don't know which full ols you have but here is wide choice.
You can easy convert 018DC ecu in 06A906032HJ for example.


	Logged

masterj

Hero Member

Karma: +62/-5
Offline

Offline

Posts: 1049

	Re: HW Difference between 8N0906018F & 4B0906018DC « Reply #4 on: April 09, 2012, 02:40:04 AM »

Quote from: gremlin on April 08, 2012, 06:16:06 PM

Don't know which full ols you have but here is wide choice.
You can easy convert 018DC ecu in 06A906032HJ for example.

Nice thanks

Do you know where can I get full ols for 06A906032HJ? I only found ArgDub's map pack, but it is saved in higher version than 1.223 which I have...


	Logged

ME7Tuner Wizard

masterj

Hero Member

Karma: +62/-5
Offline

Offline

Posts: 1049

	Re: HW Difference between 8N0906018F & 4B0906018DC « Reply #5 on: May 09, 2012, 08:51:02 AM »

Quote from: gremlin on April 08, 2012, 06:16:06 PM

Don't know which full ols you have but here is wide choice.
You can easy convert 018DC ecu in 06A906032HJ for example.

Any other variants? I can't find original (full) german damos for 06A906032HJ... (Winols upto 1.7 damos)


	Logged

ME7Tuner Wizard

masterj

Hero Member

Karma: +62/-5
Offline

Offline

Posts: 1049

	Re: HW Difference between 8N0906018F & 4B0906018DC « Reply #6 on: May 30, 2012, 10:44:51 AM »

What about 06A906032MJ (from AUQ engine)? I have full damos file for this ecu and now I would really need your advice if this is possible to reflash it?

me7check v1.11 (c) mki, 06/2004-07/2011
Checking file WinOLS (Seat Leon (Original) - 366379) (size=1048576)
Reading Version Strings...
-> Bootrom Version = 05.12
-> EPK = 41/1/ME7.5/51/4019.02//24C/Dst03o/030702/
-> Contents of ECUID data table:
- '0261208115' (SSECUHN)
- '1037366379' (SSECUSN)
- '06A906032MJ ' (VAG part number)
- '0003' (VAG sw number)
- '1.8L R4/5VT ' (engine id)
-> Contents of ECUID data table:
- 'HW_MAN004'

me7check v1.11 (c) mki, 06/2004-07/2011
Checking file VW Passat 1.8T 150HP 4B0906018DC 0261207636 362358.ori (size=1048
576)
Reading Version Strings...
-> Bootrom Version = 05.12
-> EPK = 40/1/ME7.5/5/4016.31//24b/Dst01o/220301//
-> Contents of ECUID data table:
- '0261207636' (SSECUHN)
- '1037362358' (SSECUSN)
- '4B0906018DC ' (VAG part number)
- '0001' (VAG sw number)
- '1.8L R4/5VT ' (engine id)
-> Contents of ECUID data table:
- 'HW_MAN004'


« Last Edit: May 30, 2012, 12:02:00 PM by masterj »	Logged

ME7Tuner Wizard

masterj

Hero Member

Karma: +62/-5
Offline

Offline

Posts: 1049

	Re: 4B0906018DC conversion to ??? (06A906032MJ?) « Reply #7 on: June 01, 2012, 08:42:39 AM »

Successful conversion to 06A906032MJ!

If anyone wants to do similar thing then first thing is this:
Download attached EEPROM and rewrite yours with boot mode. Then flash 06A906032MJ bin file and recode it with vcds

That's it!

P.S> Also I've attached the OLS file


« Last Edit: June 01, 2012, 08:46:01 AM by masterj »	Logged

ME7Tuner Wizard

masterj

Hero Member

Karma: +62/-5
Offline

Offline

Posts: 1049

	Re: 4B0906018DC conversion to ??? (06A906032MJ?) « Reply #8 on: June 01, 2012, 03:20:25 PM »

Small question:
looks like there are some mistakes in definition. Could someone please check MLHFM address. I think it is at 14534. Also what factor is set for x axis?


« Last Edit: June 01, 2012, 03:36:24 PM by masterj »	Logged

ME7Tuner Wizard

masterj

Hero Member

Karma: +62/-5
Offline

Offline

Posts: 1049

	Re: 4B0906018DC conversion topic « Reply #9 on: June 02, 2012, 03:55:55 AM »

Also, what maps values should I transfer from old bin for proper load calculation? I already transfered KFZWOP/2, LDRXN, LDRXNZK, KFMIRL, KFMIOP, KFMI_UM, KFZW_UM, KFMDS and fixed RKTI section. Also for some reason VCDS doesn't let me to run throttle body alignment (group 60 -> basic settings). I always get ERROR 1 and DTC that adaptation did not start.


« Last Edit: June 02, 2012, 03:57:49 AM by masterj »	Logged

ME7Tuner Wizard

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 24, 2024, 07:52:14 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search