NefMoto > Technical > Tuning > 4B0906018DC conversion topic
Pages: [1]
« previous next »
Author Topic: 4B0906018DC conversion topic  (Read 10662 times)
masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« on: April 03, 2012, 03:28:40 PM »
Hey guys!
Could you give me details on hardware differences between audi 8N0906018F and vw 4B0906018DC ? Would it be possible to convert 4B0906018DC to 8N0906018F ?
« Last Edit: June 02, 2012, 03:52:32 AM by masterj » Logged
ME7Tuner Wizard
gremlin
Hero Member
*****

Karma: +194/-9
Offline Offline

Posts: 650
« Reply #1 on: April 04, 2012, 03:55:49 PM »
Quote from: masterj
Could you give me details on hardware differences between audi 8N0906018F and vw 4B0906018DC ? Would it be possible to convert 4B0906018DC to 8N0906018F ?

No chances.
Too many differencies in HW.
018F board for reference...
« Last Edit: April 04, 2012, 04:06:43 PM by gremlin » Logged
masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« Reply #2 on: April 06, 2012, 07:12:28 AM »
Any other SW that I could convert to? (for which there are completely defined ols/damos/kp)?
Logged
ME7Tuner Wizard
gremlin
Hero Member
*****

Karma: +194/-9
Offline Offline

Posts: 650
« Reply #3 on: April 08, 2012, 06:16:06 PM »
Quote from: masterj on April 06, 2012, 07:12:28 AM
Any other SW that I could convert to? (for which there are completely defined ols/damos/kp)?

Don't know which full ols you have but here is wide choice.
You can easy convert 018DC ecu in 06A906032HJ for example.
Logged
masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« Reply #4 on: April 09, 2012, 02:40:04 AM »
Quote from: gremlin on April 08, 2012, 06:16:06 PM
Don't know which full ols you have but here is wide choice.
You can easy convert 018DC ecu in 06A906032HJ for example.

Nice thanks Smiley Do you know where can I get full ols for 06A906032HJ? I only found ArgDub's map pack, but it is saved in higher version than 1.223 which I have...
Logged
ME7Tuner Wizard
masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« Reply #5 on: May 09, 2012, 08:51:02 AM »
Quote from: gremlin on April 08, 2012, 06:16:06 PM
Don't know which full ols you have but here is wide choice.
You can easy convert 018DC ecu in 06A906032HJ for example.


Any other variants? I can't find original (full) german damos for 06A906032HJ... (Winols upto 1.7 damos)
Logged
ME7Tuner Wizard
masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« Reply #6 on: May 30, 2012, 10:44:51 AM »
What about 06A906032MJ (from AUQ engine)? I have full damos file for this ecu and now I would really need your advice if this is possible to reflash it?

me7check v1.11 (c) mki, 06/2004-07/2011
Checking file WinOLS (Seat Leon (Original) - 366379) (size=1048576)
Reading Version Strings...
-> Bootrom Version = 05.12
-> EPK = 41/1/ME7.5/51/4019.02//24C/Dst03o/030702/
-> Contents of ECUID data table:
   - '0261208115'         (SSECUHN)
   - '1037366379'         (SSECUSN)
   - '06A906032MJ '       (VAG part number)
   - '0003'               (VAG sw number)
   - '1.8L R4/5VT     '   (engine id)
-> Contents of ECUID data table:
   - 'HW_MAN004'

me7check v1.11 (c) mki, 06/2004-07/2011
Checking file VW Passat 1.8T 150HP 4B0906018DC  0261207636 362358.ori (size=1048
576)
Reading Version Strings...
-> Bootrom Version = 05.12
-> EPK = 40/1/ME7.5/5/4016.31//24b/Dst01o/220301//
-> Contents of ECUID data table:
   - '0261207636'         (SSECUHN)
   - '1037362358'         (SSECUSN)
   - '4B0906018DC '       (VAG part number)
   - '0001'               (VAG sw number)
   - '1.8L R4/5VT     '   (engine id)
-> Contents of ECUID data table:
   - 'HW_MAN004'
« Last Edit: May 30, 2012, 12:02:00 PM by masterj » Logged
ME7Tuner Wizard
masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« Reply #7 on: June 01, 2012, 08:42:39 AM »
Successful conversion to 06A906032MJ! Smiley
If anyone wants to do similar thing then first thing is this:
Download attached EEPROM and rewrite yours with boot mode. Then flash 06A906032MJ bin file and recode it with vcds Smiley That's it!

P.S> Also I've attached the OLS file
« Last Edit: June 01, 2012, 08:46:01 AM by masterj » Logged
ME7Tuner Wizard
masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« Reply #8 on: June 01, 2012, 03:20:25 PM »
Small question:
looks like there are some mistakes in definition. Could someone please check MLHFM address. I think it is at 14534. Also what factor is set for x axis?
« Last Edit: June 01, 2012, 03:36:24 PM by masterj » Logged
ME7Tuner Wizard
masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« Reply #9 on: June 02, 2012, 03:55:55 AM »
Also, what maps values should I transfer from old bin for proper load calculation? I already transfered KFZWOP/2, LDRXN, LDRXNZK, KFMIRL, KFMIOP, KFMI_UM, KFZW_UM, KFMDS and fixed RKTI section. Also for some reason VCDS doesn't let me to run throttle body alignment (group 60 -> basic settings). I always get ERROR 1 and DTC that adaptation did not start.
« Last Edit: June 02, 2012, 03:57:49 AM by masterj » Logged
ME7Tuner Wizard
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 13, 2024, 06:33:17 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 17 queries. (Pretty URLs adds 0s, 0q)