|
adam-
|
 |
« Reply #15 on: June 25, 2020, 10:59:37 PM »
|
|
|
Needles should sweep full range and then come back to centre.
|
|
|
|
|
Logged
|
|
|
|
Rs4b5limo96
Newbie
Karma: +1/-0
 Offline
Posts: 15
|
|
« Reply #16 on: June 25, 2020, 11:15:23 PM »
|
|
|
Thanks adam, then thw km/h needle is working correct
Skickat från min SM-G960F via Tapatalk
|
|
|
|
|
Logged
|
|
|
|
|
macxxx
|
|
« Reply #17 on: June 26, 2020, 01:05:34 PM »
|
|
|
Needles should sweep full range and then come back to centre.
The needels after full sweep should stop at 3000 rpm , speed 100 km/h or 60 mph |
|
|
|
|
Logged
|
|
|
|
Rs4b5limo96
Newbie
Karma: +1/-0
Offline
Posts: 15
|
|
« Reply #18 on: May 11, 2021, 01:36:25 PM »
|
|
|
Hey again, post is old but yeah..
Still haven't solve this.
Line 60 in vcds I have tried 0 and 1025 and 1027, nothing. Also tried 4 cyl and 6,8 cyl, nothing.
The rpm is very 'jerky' in vcds output test, and does not return.
And now I also have a standalone ecu, but i have activated can audi 7.5, that maxxecu say will work with can cars.
For the record, i got a 98 s4 with rs4 00 cluster
Skickat från min SM-G960F via Tapatalk
|
|
|
|
|
Logged
|
|
|
|
Fazi
Newbie
Karma: +0/-0
Offline
Posts: 18
|
|
« Reply #19 on: May 14, 2021, 06:20:20 AM »
|
|
|
Hey again, post is old but yeah..
Still haven't solve this.
Line 60 in vcds I have tried 0 and 1025 and 1027, nothing. Also tried 4 cyl and 6,8 cyl, nothing.
The rpm is very 'jerky' in vcds output test, and does not return.
And now I also have a standalone ecu, but i have activated can audi 7.5, that maxxecu say will work with can cars.
For the record, i got a 98 s4 with rs4 00 cluster
Skickat från min SM-G960F via Tapatalk
Add dump |
|
|
|
|
Logged
|
|
|
|
Rs4b5limo96
Newbie
Karma: +1/-0
Offline
Posts: 15
|
|
« Reply #20 on: May 14, 2021, 06:52:06 AM »
|
|
|
Eeprom? Can't connect, using eeprom 1.19, don't know why
Skickat från min SM-G960F via Tapatalk
|
|
|
|
|
Logged
|
|
|
|
|
macxxx
|
|
« Reply #21 on: May 14, 2021, 10:26:00 PM »
|
|
|
I guess cable/driver issue. What cluster are you trying to connect?
|
|
|
|
|
Logged
|
|
|
|
Rs4b5limo96
Newbie
Karma: +1/-0
Offline
Posts: 15
|
|
« Reply #22 on: May 17, 2021, 09:27:28 PM »
|
|
|
Im using the vag tacho cable and drivers to that.
The rs4 cluster
Skickat från min SM-G960F via Tapatalk
|
|
|
|
|
Logged
|
|
|
|
|
macxxx
|
|
« Reply #23 on: May 17, 2021, 09:47:19 PM »
|
|
|
Vagtacho is crap , use kkl cable
|
|
|
|
|
Logged
|
|
|
|
Rs4b5limo96
Newbie
Karma: +1/-0
Offline
Posts: 15
|
|
« Reply #24 on: May 17, 2021, 09:56:50 PM »
|
|
|
I have genuine vcds on the other computer, maybe I should try install 1.19 on that one and vcds kable
Skickat från min SM-G960F via Tapatalk
|
|
|
|
|
Logged
|
|
|
|
|
macxxx
|
|
« Reply #25 on: May 22, 2021, 11:06:32 PM »
|
|
|
Kkl is really cheap so just buy one  |
|
|
|
|
Logged
|
|
|
|
Rs4b5limo96
Newbie
Karma: +1/-0
Offline
Posts: 15
|
|
« Reply #26 on: August 19, 2021, 02:08:51 AM »
|
|
|
Update guys!
I have now wired a oil level sensor to cluster and it works. And then I wired canbus from my standalone ecu, the rpm didn't work, bought another cluster from facelift b5 and it did work.
So, something else than the rpm potentiometer is faulty.
So then I did it simple, got the eeprom 1.19 to work with a kkl kable, and I changed the milage on the new cluster. And I moved over the cluster faces(?) So I got the rs4 boards in the a4 cluster.
New problem. The km/h on a4 goes to 280 and rs4 310 km/h.
I thought i could just read the rs4 eeprom and write to a4 cluster and I did, don't know yet if it shows the correct speed because yeah I have to drive like 250 km/h for it to show. But what I have noticed is that the trip meter is way of, took a drive this morning for about 15 kilometers and the trip said 65 kilometers, but the speedo said I traveled in 40km/h and I did.
Can I not write eeprom from rs4 to a a4 cluster ?
Skickat från min SM-G960F via Tapatalk
|
|
|
|
|
Logged
|
|
|
|
|
macxxx
|
|
« Reply #27 on: August 19, 2021, 02:35:01 AM »
|
|
|
Upload your S4 dump i can edit IT for you - you should only change scale note the whole dump
Wysłane z mojego RMX3081 przy użyciu Tapatalka
|
|
|
|
|
Logged
|
|
|
|
Rs4b5limo96
Newbie
Karma: +1/-0
Offline
Posts: 15
|
|
« Reply #28 on: August 19, 2021, 03:26:47 AM »
|
|
|
okey!
This is the working cluster
|
|
|
|
|
Logged
|
|
|
|
Rs4b5limo96
Newbie
Karma: +1/-0
Offline
Posts: 15
|
|
« Reply #29 on: August 19, 2021, 03:28:09 AM »
|
|
|
and this is my rs4 cluster
|
|
|
|
|
Logged
|
|
|
|
|
