Pages: [1]
Author Topic: 1.8T 20v N249, N112, SAI Delete  (Read 3813 times)
ErwinGti
Newbie
*

Karma: +0/-3
Offline Offline

Posts: 11


WWW
« on: July 28, 2020, 04:52:21 PM »

can anyone explain to me how to delete these things?
as soon as I find the solution, I publish it for everyone.  with xdf for Tunerpro on ecu 06A906032HN

thank you
Logged

nyet
Administrator
Hero Member
*****

Karma: +607/-168
Online Online

Posts: 12270


WWW
« Reply #1 on: July 28, 2020, 04:58:00 PM »

Don't delete the N249.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Auriaka
Full Member
***

Karma: +17/-2
Offline Offline

Posts: 113



« Reply #2 on: July 28, 2020, 10:45:48 PM »

^this

I had it deleted on my big turbo 1.8... lost a bunch of power it felt like under 3k. Boost control is smoother and i dont get the stupid spike on throttle close.

I have tested this both ways as a skeptic and it really is better keeping it.
Logged
ErwinGti
Newbie
*

Karma: +0/-3
Offline Offline

Posts: 11


WWW
« Reply #3 on: July 29, 2020, 06:09:41 AM »

I read on the Internet that it was removed, through Tunerpro which maps should be used?
Logged

Sandstorm3k
Sr. Member
****

Karma: +10/-14
Offline Offline

Posts: 402



« Reply #4 on: July 29, 2020, 11:19:11 AM »

I read on the Internet that it was removed, through Tunerpro which maps should be used?
https://s4wiki.com/wiki/Tuning#ME7_Documentation

It's all explained here
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Online Online

Posts: 12270


WWW
« Reply #5 on: July 29, 2020, 01:36:50 PM »

I read on the Internet that it was removed, through Tunerpro which maps should be used?

Put it back.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 16 queries. (Pretty URLs adds 0s, 0q)