limits of timing at high revs

Pages: [1]

« previous next »

Author

Topic: limits of timing at high revs (Read 4807 times)

lulu2003

Full Member

Karma: +11/-1
Offline

Offline

Posts: 242

	limits of timing at high revs « on: April 20, 2012, 01:20:03 PM »

what would be the right way at above 6500 rpm.
I checked a lot of different me7 turbo files but none of them is advancing timing above 6500 or maybe 6700.
from Subarus scene I heard that knock control is not quite woking in that areas so nobody dares to advance.
are there any similar known limit to most me7?


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12270

	Re: limits of timing at high revs « Reply #1 on: April 20, 2012, 01:22:10 PM »

You can alter the axis data on the timing maps.


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

createddeleted

Full Member

Karma: +7/-2
Offline

Offline

Posts: 90

	Re: limits of timing at high revs « Reply #2 on: April 20, 2012, 03:39:41 PM »

Timing is advanced from the last known point. So if your last point is 6800 then it will continue to use that value.

I have never read that our knock control ceases to work in the upper RPM's.

Change the RPM axis, fill in the numbers, log, change, repeat.


	Logged

phila_dot

Hero Member

Karma: +173/-11
Offline

Offline

Posts: 1709

	Re: limits of timing at high revs « Reply #3 on: April 20, 2012, 05:08:40 PM »

KR doesn't shut down at high revs, but it does adjust for increased engine noise at high load/rpm.


	Logged

lulu2003

Full Member

Karma: +11/-1
Offline

Offline

Posts: 242

	Re: limits of timing at high revs « Reply #4 on: April 21, 2012, 03:28:20 AM »

Quote from: createddeleted on April 20, 2012, 03:39:41 PM

Change the RPM axis, fill in the numbers, log, change, repeat.

that's my next step.
Currently I cannot log knock voltages or retards, only very indirecty with some basic OBD values.

I was just interested in some experiences before I start investigating.

thx


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 26, 2024, 10:37:57 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search