Pages: [1] 2
Author Topic: Wrong offsets in stock bin  (Read 8457 times)
Saviorange
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 8


« on: September 17, 2020, 06:04:10 PM »

So I have a 03 gti 1.8t, i went into the krkte and saw that there we're two options, one that calculated in "_ms/%" and the other one has an input of "_cc/min". What I found weird is that the second one had a number of "38121568cc/min" are those values normal? Along with the weird offsets in kfzwop, my tvub is also not linear. I'm not sure what's up with all of that. Im trying to add crackle pop but with everything being weird with values I don't want to touch it until I figure out why its like that. Thanks for the help. Are those values normal?

Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #1 on: September 17, 2020, 07:09:57 PM »

What xdf are you using?
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Saviorange
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 8


« Reply #2 on: September 17, 2020, 07:15:59 PM »

What xdf are you using?

I have whatever definition s4wiki provides for my car
Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2802



« Reply #3 on: September 17, 2020, 08:44:23 PM »

"$1CF96";"(KRKTE) Conversion of relative fuel mass (rk) to effective injector on time (te) - Umrechnung relative Kraftstoffmasse rk in effektive Einspritzzeit te";"";"1x1";""
"$154BE";"(TVUB) voltage correction - Spannungskorrektur";"";"5x1";""
Logged

Giving your mom a tuneup
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #4 on: September 17, 2020, 08:45:10 PM »

I have whatever definition s4wiki provides for my car

And why are you using that one? Do you have a 2.7t? If so, what P/N?

Hint: unless you swapped your POS 1.8t for a 2.7t ..
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Saviorange
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 8


« Reply #5 on: September 17, 2020, 08:45:22 PM »

"$1CF96";"(KRKTE) Conversion of relative fuel mass (rk) to effective injector on time (te) - Umrechnung relative Kraftstoffmasse rk in effektive Einspritzzeit te";"";"1x1";""
"$154BE";"(TVUB) voltage correction - Spannungskorrektur";"";"5x1";""
What is this saying?
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #6 on: September 17, 2020, 08:46:21 PM »

What is this saying?

Please stop.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Saviorange
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 8


« Reply #7 on: September 17, 2020, 09:54:28 PM »

Please stop.
What? Am I dumb for not being able to understand a quote? I'm trying to learn but doesn't look like y'all want to help. I guess they were right about "the forums" I guess.
Logged
chacarita
Jr. Member
**

Karma: +11/-0
Offline Offline

Posts: 47


« Reply #8 on: September 17, 2020, 10:14:28 PM »

What Marty wrote is the address of the map (The numbers after the $) and what it means. You mentioned KRKTE and TVUB. Also 1X1 and 5X1 are the map sizes. It is really important that you try to compare with the same software as your ECU or at least a similar one and pay attention.
Logged
Saviorange
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 8


« Reply #9 on: September 17, 2020, 10:22:30 PM »

What Marty wrote is the address of the map (The numbers after the $) and what it means. You mentioned KRKTE and TVUB. Also 1X1 and 5X1 are the map sizes. It is really important that you try to compare with the same software as your ECU or at least a similar one and pay attention.
ok. I use tunerpro so i dont have to look addresses like those what he mentioned i only have to look for the pointers and modify them individually, not sure if you're familar with the program or not. So what should KRKTE should be on stock software? I don't think the input of "38121568cc/min" is correct as it shows that's whats in it.
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #10 on: September 17, 2020, 11:00:54 PM »

Why did you ignore my question about 1.8t vs 2.7t and the P/N of your ECU?
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #11 on: September 17, 2020, 11:02:36 PM »

What is this saying?

He's literally telling you where in the bin the maps you are looking for are.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Saviorange
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 8


« Reply #12 on: September 17, 2020, 11:35:26 PM »

Why did you ignore my question about 1.8t vs 2.7t and the P/N of your ECU?

Didn't see your question sorry. I have a 1.8t.

The xdf is: 8D0907551M-20190711.
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #13 on: September 17, 2020, 11:45:14 PM »

Why would that xdf work with your ECU?

You still haven't answered the other question.

What is the P/N of your ECU? Why would you think an ecu for 1.8t is even remotely similar to a 2.7t?
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Saviorange
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 8


« Reply #14 on: September 17, 2020, 11:49:46 PM »

When i first looked at the wiki that one seemed to correspond to mine almost exactly.
Logged
Pages: [1] 2
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 17 queries. (Pretty URLs adds 0s, 0q)