Pages: [1]
Author Topic: B7 A4 2.0TFSI MAF frequency range  (Read 3525 times)
bradyzq
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 13


« on: October 21, 2020, 12:11:00 PM »

Hi All,

I'm curious about this. Specifically, I'm looking at 8E1910115G 0010 HW 0261S02521 SW 1037389075, but should apply to all.

What is the range of frequencies (or, technically periods) that the stock MAF outputs?

And what is the maximum range of frequencies or periods that the ECU can understand if it's not the same as what the MAF outputs?

The MAF calibration table is at 1C4B20, right after KFKHFM.

All this is with the goal of installing a different MAF, not just a bigger housing.
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Online Online

Posts: 12270


WWW
« Reply #1 on: October 21, 2020, 12:12:54 PM »

AFAIK MAF outputs are DC not PWM.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
bradyzq
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 13


« Reply #2 on: October 21, 2020, 01:49:00 PM »

Do you mean DC voltage like older VAG MAFs? Or somehow duty cycle?

The lack of MLHFM in the ECU, replaced by MSHFMTPH'(Massenstrom aus HFM in abhängigkeit von Periodendauer) is what made me think it's frequency-based.
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Online Online

Posts: 12270


WWW
« Reply #3 on: October 21, 2020, 01:52:50 PM »

I could be wrong of course.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
gman86
Hero Member
*****

Karma: +45/-128
Offline Offline

Posts: 705


« Reply #4 on: October 21, 2020, 02:20:43 PM »

I could be wrong of course.

MED9 MAF is PWM
Logged
cherry
Sr. Member
****

Karma: +26/-2
Offline Offline

Posts: 260


« Reply #5 on: October 22, 2020, 05:43:52 AM »

It´s PWM for sure. I measured it in past, i can take a look later if i find some information. Bosch (Audi TT-S CDL engine)and Hitachi was totally different. Your Audi should be a Hitachi.
Logged
bradyzq
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 13


« Reply #6 on: October 22, 2020, 12:51:03 PM »

They LOOK like some GM MAFs, which tend to operate in the 2k to 15k ish Hz range. Whether or not the stock MAF operates in that range, maybe the ECU can make sense of GM signals, he said hopefully....
Logged
cherry
Sr. Member
****

Karma: +26/-2
Offline Offline

Posts: 260


« Reply #7 on: October 22, 2020, 04:15:50 PM »

Idle is about 2k hz. It´s not a pwm, but frequency...
Logged
bradyzq
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 13


« Reply #8 on: October 23, 2020, 06:32:27 AM »

Excellent. Thank you!
Logged
bradyzq
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 13


« Reply #9 on: October 23, 2020, 12:32:24 PM »

Excellent. Thank you!
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 16 queries. (Pretty URLs adds 0s, 0q)