Pages: [1]
Author Topic: A4 B7 RB8 immo3 Dash what do i need?  (Read 4216 times)
Dominik89
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 10


« on: October 24, 2020, 11:00:22 AM »

Hello
I have an 2006 a4 B7 1.8t quattro
I want to switch my dash to one with a Color Display
The Car has immo3 and Rb8 Bosch dash.
I asked a couple tuners to do this job but nobody wants to touch it.(im from germany)

What software do i need to reliably write my immo Id and vin to an other dash?
Dosent need to be newest software just has to work for my immo3 B7 audi dash.

I have a blue KKL kable and the newest VCDS
Please tell me what do i need to finally get this done.


Logged
macxxx
Sr. Member
****

Karma: +29/-1
Offline Offline

Posts: 498


« Reply #1 on: October 25, 2020, 07:26:25 AM »

you won't do it with any software and kkl cable - you need at least Vag dash Can
Logged
BlackT
Hero Member
*****

Karma: +79/-39
Offline Offline

Posts: 1415



« Reply #2 on: October 25, 2020, 09:01:14 AM »

There is one other solution, maybe macxxx can confirm will it work.

1. You can do immo off on you ECU so car can start.
2. Then you buy from donor car cluster and working key.

You put cluster from donor to your car, and switch transponder chip from donor key to your key

On that way car will start, and no errors on dash. Only down point is you will have part workong immo. If someone try to steel your car it will have hazards warning on but engine will start

« Last Edit: October 25, 2020, 09:02:51 AM by BlackT » Logged
macxxx
Sr. Member
****

Karma: +29/-1
Offline Offline

Posts: 498


« Reply #3 on: October 25, 2020, 10:49:42 AM »

Yes it will work
Logged
Dominik89
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 10


« Reply #4 on: October 25, 2020, 04:24:13 PM »

what about CARPROG V9.31 would that work too?
Logged
macxxx
Sr. Member
****

Karma: +29/-1
Offline Offline

Posts: 498


« Reply #5 on: October 25, 2020, 04:37:27 PM »

As i remember carprog reads rb4/rb8 so it should work
Logged
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1566


« Reply #6 on: October 26, 2020, 06:11:39 AM »

dejavu tool will do it
Logged
macxxx
Sr. Member
****

Karma: +29/-1
Offline Offline

Posts: 498


« Reply #7 on: October 27, 2020, 05:57:44 AM »

dejavu is pricey  Wink  900 EUR
« Last Edit: October 27, 2020, 05:59:44 AM by macxxx » Logged
Dominik89
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 10


« Reply #8 on: October 28, 2020, 12:59:39 PM »

I think i will buy smok
Interface + VW0021 Bosch K-line OBD
http://smok.com.pl/index.php?id_product=76&controller=product&id_lang=2

Should be enough to switch a dash right?
Logged
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1566


« Reply #9 on: October 28, 2020, 11:59:40 PM »

dejavu is pricey  Wink  900 EUR

was alot cheaper back then when i had it   Shocked
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 17 queries. (Pretty URLs adds 0s, 0q)