NefMoto > Technical > Cluster and Immobilizer (Moderator: ddillenger) > Flashing and boot mode Saturn 3.0L / Cadillac 3.2L troubles ME7.3.1
Pages: 1 [2]
« previous next »
Author Topic: Flashing and boot mode Saturn 3.0L / Cadillac 3.2L troubles ME7.3.1  (Read 10896 times)
mdccode5150
Full Member
***

Karma: +13/-4
Offline Offline

Posts: 122
« Reply #15 on: December 01, 2020, 03:59:26 PM »
Need a stereo microscope...I am going to try shorting where pin# 20 pad should be connected to, and see if I can boot it. If not I have ~30 of these and will sell them on eBay. I think the ME9.6 will be easier to work with.
Logged
mdccode5150
Full Member
***

Karma: +13/-4
Offline Offline

Posts: 122
« Reply #16 on: October 23, 2023, 10:04:16 PM »
Back from the dead!!! I can now read and write to the ME7.6 aka Cadillac Catera ecu's. The file size is 512kb. and reads as: 44/1/ME7.6/6/26_0//7606296e/02960501/020603/. It is a bastard child of a ecu/ecm pinout of an Alfa 7.3.1, the maps look like a ME3.1, and can only be read as an Opel / ME7 Huh


I tried to use the EEPROM tools:

ME7EEPROM.exe - No communication micro (OBD & Boot also tried all CSpins)
me7_95040.exe - No communication micro (OBD & Boot also tried all CSpins)
eepromtool_04.exe - It said not ME7

I would be happier if I could immo off these. I think OLS recognizes ~40 maps

I'm going to try more cables Wink
Logged
mdccode5150
Full Member
***

Karma: +13/-4
Offline Offline

Posts: 122
« Reply #17 on: October 23, 2023, 10:06:21 PM »
Back from the dead!!! I can now read and write to the ME7.6 aka Cadillac Catera ecu's. The file size is 512kb. and reads as: 44/1/ME7.6/6/26_0//7606296e/02960501/020603/. It is a bastard child of a ecu/ecm pinout of an Alfa 7.3.1, the maps look like a ME3.1, and can only be read as an Opel / ME7 Huh


I tried to use the EEPROM tools:

ME7EEPROM.exe - No communication micro (OBD & Boot also tried all CSpins)
me7_95040.exe - No communication micro (OBD & Boot also tried all CSpins)
eepromtool_04.exe - It said not ME7

I would be happier if I could immo off these. I think OLS recognizes ~40 maps

I'm going to try more cables Wink
Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2802
« Reply #18 on: October 24, 2023, 01:06:06 AM »
Quote from: mdccode5150 on October 23, 2023, 10:06:21 PM
Back from the dead!!! I can now read and write to the ME7.6 aka Cadillac Catera ecu's. The file size is 512kb. and reads as: 44/1/ME7.6/6/26_0//7606296e/02960501/020603/. It is a bastard child of a ecu/ecm pinout of an Alfa 7.3.1, the maps look like a ME3.1, and can only be read as an Opel / ME7 Huh


I tried to use the EEPROM tools:

ME7EEPROM.exe - No communication micro (OBD & Boot also tried all CSpins)
me7_95040.exe - No communication micro (OBD & Boot also tried all CSpins)
eepromtool_04.exe - It said not ME7

I would be happier if I could immo off these. I think OLS recognizes ~40 maps

I'm going to try more cables Wink
I posted the solution for immo off here https://pcmhacking.net/forums/viewtopic.php?f=38&t=7760&start=20
Logged
Giving your mom a tuneup
Pages: 1 [2]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 26, 2024, 09:34:47 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 17 queries. (Pretty URLs adds 0s, 0q)