Pages: [1]
Author Topic: DQ250 clutch torque issue  (Read 3641 times)
ship
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 12


« on: January 22, 2021, 11:47:54 PM »

Hi
My clutch torque cannot be greater than 500nm, once it exceeds, it will reduce the fuel injection
Did I miss other limiters?
« Last Edit: January 23, 2021, 12:06:37 AM by ship » Logged
reycket
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 17


« Reply #1 on: January 24, 2021, 02:49:39 PM »

hello, no the torque on k1 or k2 does not restrict the injection. because you can increase your pressure in bar on k1 and k2
Logged
ship
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 12


« Reply #2 on: January 25, 2021, 12:32:04 AM »

hello, no the torque on k1 or k2 does not restrict the injection. because you can increase your pressure in bar on k1 and k2

Hello, How to increase the pressure of k1 and k2?
Logged
reycket
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 17


« Reply #3 on: January 26, 2021, 02:34:32 PM »

in your dsg stage 2 program, set the map and single values ​​at 15 bar and the map and single mA
« Last Edit: January 26, 2021, 02:36:55 PM by reycket » Logged
reycket
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 17


« Reply #4 on: January 26, 2021, 02:39:10 PM »

what is your engine configuration? stage 3? engine parts?
Logged
ship
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 12


« Reply #5 on: January 27, 2021, 07:24:31 AM »

in your dsg stage 2 program, set the map and single values ​​at 15 bar and the map and single mA
Hi, Which map? (Attach mappack)
Logged
ship
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 12


« Reply #6 on: January 27, 2021, 07:29:31 AM »

what is your engine configuration? stage 3? engine parts?
Hi, My engine is DFLA(ea288), big turbo, dpf off, 190p injector
Logged
chora
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 16


« Reply #7 on: April 06, 2021, 03:02:45 PM »

hello
do you have original file?
Logged
ship
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 12


« Reply #8 on: April 09, 2021, 06:42:59 AM »

hello
do you have original file?

As attached
Logged
KRACER
Newbie
*

Karma: +0/-4
Offline Offline

Posts: 15


« Reply #9 on: July 06, 2021, 04:28:27 PM »

I had the same problem,I set the MDNORM to 500NM and the gearbox will limit the power at 4000 -7000RPM。
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.032 seconds with 16 queries. (Pretty URLs adds 0.008s, 0q)