NefMoto > Technical > Tuning > DQ250 clutch torque issue
Pages: [1]
« previous next »
Author Topic: DQ250 clutch torque issue  (Read 4205 times)
ship
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 12
« on: January 22, 2021, 11:47:54 PM »
Hi
My clutch torque cannot be greater than 500nm, once it exceeds, it will reduce the fuel injection
Did I miss other limiters?
« Last Edit: January 23, 2021, 12:06:37 AM by ship » Logged
reycket
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 17
« Reply #1 on: January 24, 2021, 02:49:39 PM »
hello, no the torque on k1 or k2 does not restrict the injection. because you can increase your pressure in bar on k1 and k2
Logged
ship
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 12
« Reply #2 on: January 25, 2021, 12:32:04 AM »
Quote from: reycket on January 24, 2021, 02:49:39 PM
hello, no the torque on k1 or k2 does not restrict the injection. because you can increase your pressure in bar on k1 and k2

Hello, How to increase the pressure of k1 and k2?
Logged
reycket
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 17
« Reply #3 on: January 26, 2021, 02:34:32 PM »
in your dsg stage 2 program, set the map and single values ​​at 15 bar and the map and single mA
« Last Edit: January 26, 2021, 02:36:55 PM by reycket » Logged
reycket
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 17
« Reply #4 on: January 26, 2021, 02:39:10 PM »
what is your engine configuration? stage 3? engine parts?
Logged
ship
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 12
« Reply #5 on: January 27, 2021, 07:24:31 AM »
Quote from: reycket on January 26, 2021, 02:34:32 PM
in your dsg stage 2 program, set the map and single values ​​at 15 bar and the map and single mA
Hi, Which map? (Attach mappack)
Logged
ship
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 12
« Reply #6 on: January 27, 2021, 07:29:31 AM »
Quote from: reycket on January 26, 2021, 02:39:10 PM
what is your engine configuration? stage 3? engine parts?
Hi, My engine is DFLA(ea288), big turbo, dpf off, 190p injector
Logged
chora
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 16
« Reply #7 on: April 06, 2021, 03:02:45 PM »
hello
do you have original file?
Logged
ship
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 12
« Reply #8 on: April 09, 2021, 06:42:59 AM »
Quote from: chora on April 06, 2021, 03:02:45 PM
hello
do you have original file?

As attached
Logged
KRACER
Newbie
*

Karma: +0/-4
Offline Offline

Posts: 15
« Reply #9 on: July 06, 2021, 04:28:27 PM »
I had the same problem，I set the MDNORM to 500NM and the gearbox will limit the power at 4000 -7000RPM。
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • December 02, 2024, 08:32:48 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.079 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)