Stock tune DTC P0130

Pages: 1 [2]

« previous next »

Author

Topic: Stock tune DTC P0130 (Read 10200 times)

stuydub

Full Member

Karma: +25/-12
Offline

Offline

Posts: 230

	Re: Stock tune DTC « Reply #15 on: April 28, 2021, 02:52:03 AM »

I get nothing no trims with this error


	Logged

stuydub

Full Member

Karma: +25/-12
Offline

Offline

Posts: 230

	Re: Stock tune DTC « Reply #16 on: April 28, 2021, 02:52:49 AM »

Quote from: Sandstorm3k on April 28, 2021, 02:50:51 AM

You are a legend! I'm going to check this out and make sense of it... i must be able to understand this.

its pretty easy to understand


	Logged

Sandstorm3k

Sr. Member

Karma: +10/-14
Offline

Offline

Posts: 402

	Re: Stock tune DTC « Reply #17 on: April 28, 2021, 02:54:22 AM »

Still raises the question why this DTC comes up; what can trigger it? It definitely didn't come out of the factory like this.


	Logged

Sandstorm3k

Sr. Member

Karma: +10/-14
Offline

Offline

Posts: 402

	Re: Stock tune DTC « Reply #18 on: April 29, 2021, 02:52:58 AM »

Quote from: stuydub on April 28, 2021, 02:33:28 AM

1070F + 63 = 10772 = CLALSH and 10773 = CLALSV

I feel quite stupid, CLALSV was defined in my XDF and it says exactly in the FR what it does. Thanks again though.

Now this code can't be a specific SW version issue either. I've got a friend running 032DE 0002 pretty much identical cars both modelyear 2001, he doesn't have the P0130 issue. I've also tried 032DE 0001 or 0002 no difference. Now I know another guy also has P0130 issue but i think it's an AUQ on 032HJ. There has to be some (probably easy) explaination for this.

Hiding the fault is not my preferred method but i'm really out of ideas at this point.

CLALSH is post o2 but i think if you use this it still shows up on VCDS. Setting diagnose codewords to 0 is better.


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12268

	Re: Stock tune DTC « Reply #19 on: April 29, 2021, 10:52:58 AM »

Quote from: Sandstorm3k on April 28, 2021, 02:54:22 AM

Still raises the question why this DTC comes up; what can trigger it? It definitely didn't come out of the factory like this.

I have seen this on occasion as well, unexplained.


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

fknbrkn

Hero Member

Karma: +185/-23
Offline

Offline

Posts: 1454

mk4 1.8T AUM

	Re: Stock tune DTC « Reply #20 on: April 29, 2021, 02:23:06 PM »

Its dumb way to mask dtc; no o2 reg and no trims with it

Id say there is few reasons for that

- as gremlin said on some long engines this code appears when setting cwkonls 1
- poisoned with rich mixture at start
- cdlsh and other emissions delete mistakes
- on a stock setup it could be from the second o2 in some conditions if its shows too different mixture than first sensor


	Logged

Sandstorm3k

Sr. Member

Karma: +10/-14
Offline

Offline

Posts: 402

	Re: Stock tune DTC « Reply #21 on: April 30, 2021, 01:27:26 AM »

Quote from: fukenbroken on April 29, 2021, 02:23:06 PM

Its dumb way to mask dtc; no o2 reg and no trims with it

Yeah, that does suck. Perhaps a stupid suggestion but maybe i could set a diagnosis threshold to a much higher value? I'll see if the FR makes me any wiser.

Sometimes code gets set after maybe 30km sometimes 100km. Most of the times it doesn't get set when cruising, rather after a WOT pull. But i could be mistaken here..

Worth noting; it has a high pressure in line pump leading up to the 4 bar regulator on stock 317cc injectors. I have calibrated this correctly. (Tune that came on the car corrected using FKKVS, I use KRKTE instead)

- Code gets set on stock software and on my own 'tune'.

- I could try deleting second o2 again see if it stays out; i have tried this before though. I delete according to wiki, and either with or without the second o2 delete i eventually get P0130.

- Poisoned with rich mixture on cold start is definitely something i'm going to check later today.

I'm willing to try anything to properly resolve this issue as it has been driving me nuts for literally years now.


« Last Edit: April 30, 2021, 01:47:11 AM by Sandstorm3k »	Logged

Sandstorm3k

Sr. Member

Karma: +10/-14
Offline

Offline

Posts: 402

	Re: Stock tune DTC « Reply #22 on: April 30, 2021, 02:43:45 AM »

I believe page 443-448 of the FR have something to say about how these conditions are met and set. A lot of abbreviations I haven't seen before so i'll have to do some digging.


	Logged

Sandstorm3k

Sr. Member

Karma: +10/-14
Offline

Offline

Posts: 402

	Re: Stock tune DTC « Reply #23 on: May 11, 2021, 12:27:36 AM »

CDHSH 0
CDHSHE 0
CDHSVE 0
CDKAT 0
CDLASH 0
CDLSA 0
CWLSHA 0
CDLSH 0
CWKONABG 0
CWKONLS 1
FKHABMN_0_A 0
FKHABMN_0_1 0
SRY thresholds to 0 (SRYAGR, SRYHS, SRYKAT, SRYLS, SRYSLS, SRYTES)

Very helpful user @stuydub has came up with this combination of codwords to get rid of P0130. I'm about to test this out today and have located all these codewords except for SRY codewords.

Attached are two screenshots, i know where 032HN SRY codewords are located. But i'm not 100% on what address the 032DE SRY codewords start. Should it be 0x1097E or 0x1097F?


	Logged

stuydub

Full Member

Karma: +25/-12
Offline

Offline

Posts: 230

	Re: Stock tune DTC « Reply #24 on: May 11, 2021, 11:39:36 AM »

Quote from: Sandstorm3k on May 11, 2021, 12:27:36 AM

From DE damos


« Last Edit: May 11, 2021, 11:53:17 AM by stuydub »	Logged

_nameless

Hero Member

Karma: +342/-466
Offline

Offline

Posts: 2800

	Re: Stock tune DTC « Reply #25 on: May 11, 2021, 02:49:29 PM »

Quote from: Sandstorm3k on May 11, 2021, 12:27:36 AM

sry are for readiness status has nothing directly to do with generating that code. I would advise getting another ecu or verify you dont have a 2l 8v ecu. youll get this code with a 2l ecu


	Logged

Giving your mom a tuneup

stuydub

Full Member

Karma: +25/-12
Offline

Offline

Posts: 230

	Re: Stock tune DTC « Reply #26 on: May 11, 2021, 03:31:36 PM »

Quote from: Marty on May 11, 2021, 02:49:29 PM

sry are for readiness status has nothing directly to do with generating that code. I would advise getting another ecu or verify you dont have a 2l 8v ecu. youll get this code with a 2l ecu

same code on HJ HN MJ all 1.8t this method has fixed all 3 with b1 s1 fault


	Logged

Sandstorm3k

Sr. Member

Karma: +10/-14
Offline

Offline

Posts: 402

	Re: Stock tune DTC « Reply #27 on: May 11, 2021, 10:26:42 PM »

Quote from: Marty on May 11, 2021, 02:49:29 PM

sry are for readiness status has nothing directly to do with generating that code. I would advise getting another ecu or verify you dont have a 2l 8v ecu. youll get this code with a 2l ecu

Alright, thanks.

I have multiple ECU's 032DE and 032DR. Both throw this code, so definitely not an ECU problem.


	Logged

Sandstorm3k

Sr. Member

Karma: +10/-14
Offline

Offline

Posts: 402

	Re: Stock tune DTC P0130 « Reply #28 on: August 10, 2022, 12:38:58 PM »

Notes on this old topic: manifold had a crack which might or might not have caused this

Car is now on a K04-023 kit from a TT225 running 1ML906032A software. DTC hasn't came back Grin


	Logged

Pages: 1 [2]

« previous next »

Jump to:

Navigation

Personal Tools

November 22, 2024, 03:20:25 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search