VVT delete

Pages: [1] 2

« previous next »

Author

Topic: VVT delete (Read 19965 times)

tuffty

Jr. Member

Karma: +0/-3
Offline

Offline

Posts: 28

	VVT delete « on: May 08, 2012, 01:18:48 PM »

Has anyone done a VVT delete or know how to do one? I have an Audi S3 (AMK, 8N0906018J)... main reason for doing it is I want to run a non VVT tensioner to see if it eliminates what I believe to be a mechanical issue with my engine and a new VVT tensioner is stupidly expensive in comparison to non VVT plus I have access to a new non VVT unit I can try out... I would like to code out the VVT so that the ECU doesn't get upset and my map runs as it should...

Cheers

<tuffty/>


	Logged

Barks

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 34

	Re: VVT delete « Reply #1 on: May 09, 2012, 04:54:09 AM »

I am interested too (Currently APY planing to move to wideband),

I have not managed to find any infomation on coding out the VVT unlike EVAP, EGT SAI etc, just on adding a a resistor as per:-

http://forums.vwvortex.com/showthread.php?4754307-Narrowband-to-Wideband-conversion-done-easy


	Logged

tuffty

Jr. Member

Karma: +0/-3
Offline

Offline

Posts: 28

	Re: VVT delete « Reply #2 on: May 09, 2012, 05:29:03 AM »

I have an old VVT solenoid so I can fudge the open circuit etc diagnosis but still get the set point not reached fault... although I am pretty sure this is not the entire picture as I am not sure how this affects the logic of the ECU...

I will try and have a read of the functions doc and see if I can make any sense of it but I would imagine there are a few bits of the map that need setting to 0 to 'switch off' VVT rather than make the ECU ignore faults as it will still try and use the position 2 maps at a guess which is probably not the best idea....

I suppose you could set them all to be the same but disabling the act of using VVT seems a better approach to me...

<tuffty/>


	Logged

janne

Full Member

Karma: +2/-0
Offline

Offline

Posts: 50

	Re: VVT delete « Reply #3 on: May 10, 2012, 01:42:42 AM »

Hi.
If I remember right there is nws_sy or something and it is :
0=off
1= on/off
3= portable/continously


	Logged

tuffty

Jr. Member

Karma: +0/-3
Offline

Offline

Posts: 28

	Re: VVT delete « Reply #4 on: May 11, 2012, 05:30:35 AM »

Thanks, I'll have a hunt through the Function docs and see what I can find..

<tuffty/>


	Logged

tuffty

Jr. Member

Karma: +0/-3
Offline

Offline

Posts: 28

	Re: VVT delete « Reply #5 on: May 11, 2012, 06:23:05 AM »

Looking through the docs I found the following in 'PROKONAL 1:30'

System Contant
SY_NWS: camshaft adjustment
= 0: No NWS
= 1: 2-point NWS
= 2: steady NWS
> 2: not defined

Some info about dependences but I cannot find where or how I would access this variable to change it... closest I have got so far is CDNWS (currently set at 3) with the definition of 'Code word DNWS off (EURO-coding), CD ..= 0 -> no diagnosis'

Further potential sections...
ANWSER (intake camshaft control plate switch)
BBDNWS (ready diagnosis camshaft)
DNWSEEIN (Diagnosis of the camshaft stage (inlet side))
DNWSEIN (Diagnosis valve timing (intake side))

There are a few more but you get the picture... would appear it should be a case of simply setting SY_NWS=0 and jobs a good un but I can't find it in my maps currently... unless of course I am missing something completely... which is more likely


	Logged

elRey

Hero Member

Karma: +32/-1
Offline

Offline

Posts: 565

	Re: VVT delete « Reply #6 on: May 11, 2012, 10:49:05 AM »

I've also put a VVT file onto a non-VVT car. I'll look to see what I did to code it out.


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12271

	Re: VVT delete « Reply #7 on: May 11, 2012, 12:51:27 PM »

Quote from: tuffty on May 11, 2012, 06:23:05 AM

would appear it should be a case of simply setting SY_NWS=0

Unfortunately, the SY_ constants are compile time and fixed per image. You cannot change them. You can only find a different image which was compiled with a different SY_ setting.


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

tuffty

Jr. Member

Karma: +0/-3
Offline

Offline

Posts: 28

	Re: VVT delete « Reply #8 on: May 11, 2012, 01:01:24 PM »

I thought as much... booo.... I guess an approach would be to code out the diagnostics and make relevant variant 1/2 tables the same values (as the position 1)... I have a spare VVT solenoid to keep the ECU happy for that at least it will just be the setpoint not reached code I suspect that needs sorting...

<tuffty/>


	Logged

gremlin

Hero Member

Karma: +196/-9
Offline

Offline

Posts: 655

	Re: VVT delete « Reply #9 on: May 22, 2012, 05:17:40 PM »

Quote from: tuffty on May 11, 2012, 01:01:24 PM

II guess an approach would be to code out the diagnostics and make relevant variant 1/2 tables the same values (as the position 1)... I have a spare VVT solenoid to keep the ECU happy for that at least it will just be the setpoint not reached code I suspect that needs sorting...

Additional hidden issue.
Until some VVT errors are detected your ECU switch off LTFT


	Logged

grey

Full Member

Karma: +4/-1
Offline

Offline

Posts: 146

	VVT Delete « Reply #10 on: April 04, 2014, 10:40:24 AM »

Hi Guys,

I swaped my head from AWT to AEB engine...Ecu is a ME7.5 (4B0 906 018 DH)
I had this fault code ; 17939 - Camshaft Timing Adjustment:
P1531 Open Circuit

After the ESKONF map tuning, i have a new error code about cam position sensor...

17748- Camshaft Position Sensor (G40) / Engine Speed Sensor (G28)
P1340 Incor. Correlation

I think this issue related with VVT, but i couldn't solve..

How can i sort out this issue ? Do you have a any suggestions about that ?

Thank you


	Logged

IamwhoIam

Hero Member

Karma: +52/-115
Offline

Offline

Posts: 1070

	Re: VVT Delete « Reply #11 on: April 04, 2014, 11:20:46 AM »

Incorrect correlation means whoever did the timing belt on that engine needs to stop touching Audis.


	Logged

I have no logs because I have a boost gauge (makes things easier)

snakey001

Newbie

Karma: +0/-0
Offline

Offline

Posts: 20

	Re: VVT Delete « Reply #12 on: April 04, 2014, 02:15:27 PM »

http://wiki.ross-tech.com/wiki/index.php/17748/P1340/004928


	Logged

adam-

Hero Member

Karma: +124/-33
Offline

Offline

Posts: 2179

	Re: VVT Delete « Reply #13 on: April 04, 2014, 03:37:56 PM »

As brutal as the other guy put it, he's right.

Timing is off between crank and cam. Check belt, and be upset at the guy who did the belt. Unless it was you?!


	Logged

titi65

Jr. Member

Karma: +1/-0
Offline

Offline

Posts: 43

	Re: VVT Delete « Reply #14 on: April 04, 2014, 11:40:12 PM »

Do you have changed only piston ?
Or ECU too ?


	Logged

Pages: [1] 2

« previous next »

Jump to:

Navigation

Personal Tools

November 30, 2024, 01:57:59 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search