NefMoto > Technical > Cluster and Immobilizer (Moderator: ddillenger) > TT Immo - cannot read full eeprom
Pages: [1]
« previous next »
Author Topic: TT Immo - cannot read full eeprom  (Read 3262 times)
Byront
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 7
« on: March 23, 2021, 11:11:48 PM »
Hey all

So the first replacement I got was not up to the job, this is the second - but for some reason Vagcommander 2.5 only reads TT Shadow 1 or Shadow 3, if I direct full read, it crashes everytime.

Attached are the files, if the SKC is in any of them it would be awesome - else I'm stumped.
Logged
stuydub
Full Member
***

Karma: +25/-12
Offline Offline

Posts: 230
« Reply #1 on: March 24, 2021, 02:17:11 AM »
Try reading ECU for SKC use pattern 11 in VKC 2.5
Logged
Byront
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 7
« Reply #2 on: March 24, 2021, 12:11:09 PM »
Sorry - needed to be more prescriptive.

I have the old SKU from the cluster - its 00109, that came from the ECU off VKC.

I have a replacement cluster which i need to find the SKC from and this is where the problem is occurring. Need to read the cluster eeprom, which is a Marinelli unit.

Cheers
Logged
elektronik13
Full Member
***

Karma: +10/-36
Offline Offline

Posts: 204
« Reply #3 on: March 24, 2021, 03:33:26 PM »
Quote from: Byront on March 24, 2021, 12:11:09 PM
Sorry - needed to be more prescriptive.

I have the old SKU from the cluster - its 00109, that came from the ECU off VKC.

I have a replacement cluster which i need to find the SKC from and this is where the problem is occurring. Need to read the cluster eeprom, which is a Marinelli unit.

Cheers
try reading as direct
Logged
Byront
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 7
« Reply #4 on: March 24, 2021, 04:45:14 PM »
Can't it crashed VKC everytime just after connection.
Logged
elektronik13
Full Member
***

Karma: +10/-36
Offline Offline

Posts: 204
« Reply #5 on: March 25, 2021, 01:28:54 AM »
Quote from: Byront on March 24, 2021, 04:45:14 PM
Can't it crashed VKC everytime just after connection.
if direct does not work, reading the eeprom processor with the programmer remains
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 26, 2024, 10:41:58 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 16 queries. (Pretty URLs adds 0s, 0q)