Seat leon med 9.1 read issue

Pages: [1]

« previous next »

Author

Topic: Seat leon med 9.1 read issue (Read 12739 times)

ianfr

Newbie

Karma: +0/-0
Offline

Offline

Posts: 1

	Seat leon med 9.1 read issue « on: April 18, 2021, 01:12:06 AM »

Hi there, wondering if anyone can shed any light on a problem I have.
Obtained a seat leon 2007 2.0 tfsi bwa engine code.
Car runs drives well , but for some reason I cannot read the engine control module. I had a friend attempt to read with vcds but the error comes back engine control module not present, all other modules read out fine .error on door lock which is common but that's it . Unfortunately I don't have the scan to show .
The car is ex police car so I'm presuming it's not been tuned etc .
Checked DLC port for resistance etc checked fuses now I'm lost. Any help would be greatly appreciated regards ian


	Logged

aef

Hero Member

Karma: +69/-46
Offline

Offline

Posts: 1600

	Re: Seat leon med 9.1 read issue « Reply #1 on: April 20, 2021, 12:27:37 AM »

scan/log with vcds version number would help
would remove ecu and try on the bench


	Logged

Zed1997

Newbie

Karma: +0/-0
Offline

Offline

Posts: 1

	Re: Seat leon med 9.1 read issue « Reply #2 on: November 16, 2022, 03:04:03 AM »

I think I have the same issue. I can read everything with VCDS but really everything except the engine. Everytime by trying to read the engine its say no communication. Did you solve yours?


	Logged

Dande

Jr. Member

Karma: +2/-0
Offline

Offline

Posts: 45

	Re: Seat leon med 9.1 read issue « Reply #3 on: November 16, 2022, 10:18:48 AM »

I think uploading the whole original eeprom via bdm and restoring the immo will solve this problem.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 23, 2024, 09:38:32 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search