Pages: [1]
Author Topic: 2.7 stage 3 rich under load/boost  (Read 3733 times)
JunkB5
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 6


« on: September 01, 2021, 04:43:14 AM »

I have a Daz tunned stage 3 s4, the car wont learn any long term fuel trims, channel 32 reads 0 all across the board, at idle the car is pulling upwards of -25% fuel short term, I have no codes, driving the car slowly/easily it will seem fine, but as soon as load is introduced (25%throttle or more) it will tank all the way to 8.0afr

I've been battling this issue for a while now and have checked numerous times for boost leaks/vacuum leaks, ive checked fuel pressure
the car has newer o2's but I have a new set to change out this weekend, recently ive replaced, 034 spider hose kit, all couplings, 710n's, Maf, Map, coolant temp sensor, and fpr

I have a thread on audizine and a guy has recommended to log it with me7 logger so that brought me here and I plan to do that but I've never logged outside of vagcom before and not entirely sure what I should be logging, so I guess my post is kinda, "here's what I have going on, what do you guys recommend I log to start off with?"




Logged
JunkB5
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 6


« Reply #1 on: September 01, 2021, 05:32:42 AM »

here is a log I did yesterday via vagcom
Logged
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1282



« Reply #2 on: September 01, 2021, 05:40:10 AM »

PDF.... log using me7logger, ignition overall, ignition knocks per cylinder/overall, lambdas desired,fr_w, frm_w, maf,load,boost etc.. Search the forum for basic logging values you add/remove variables depending on what you wanna diagnose.

Did you check DTC's, its usually one stopping ltft's or some other hardware fault.
Logged
JunkB5
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 6


« Reply #3 on: September 01, 2021, 05:47:59 AM »

No dtc's

I'm going to setup me7 logger and pull a log today after work, should I not post as a pdf?
 I'll attach an xlsx to this
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12271


WWW
« Reply #4 on: September 01, 2021, 05:48:29 PM »

No dtc's

I'm going to setup me7 logger and pull a log today after work, should I not post as a pdf?
 I'll attach an xlsx to this

Please read the damn rules. Dont post excel files.

http://nefariousmotorsports.com/forum/index.php?topic=5295.0title=

I have no idea why people insist on ignoring the stickies *multiple times*
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
JunkB5
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 6


« Reply #5 on: September 02, 2021, 08:01:06 AM »

Please read the damn rules. Dont post excel files.

http://nefariousmotorsports.com/forum/index.php?topic=5295.0title=

I have no idea why people insist on ignoring the stickies *multiple times*


Sir yes sir!
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 15 queries. (Pretty URLs adds 0.001s, 0q)