Pages: [1]
Author Topic: 018DC -> 018DH idle problem  (Read 2065 times)
1k.remap
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6



WWW
« on: September 05, 2021, 03:40:17 AM »

Hello guys
i have some kind of problem with my Passat B5.5 2002 EuroSpec
The engine is AWT, original ecu with partnumber end 018DC
I've got a spare ecu for mods from the passat b 5.5 with the ending of 018DH

Basically everything works ok, but i have idle problems. On original ecu (dc), i have steady idle, no grownups or downs, idle is great. Consumption on FIS ~1.0 l/h
On the other hand, when i put my 018dh ecu, i have bad idle, 1.6-1.9 l/h consumption. I checked KRKTE on ori and mod, and on ori krkte = 0.10478, on 018dh krkte = 0.069819

Can someone help me noob with this problem
Thanks in advance Smiley
Logged
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1277



« Reply #1 on: September 05, 2021, 07:43:02 AM »

Mate read the first section of the s4wiki. You need to port the fueling maps from original ecu , if you got the original fueling system.
Logged
gremlin
Hero Member
*****

Karma: +179/-7
Offline Offline

Posts: 568


« Reply #2 on: September 05, 2021, 08:35:15 AM »

I checked KRKTE on ori and mod, and on ori krkte = 0.10478, on 018dh krkte = 0.069819

You're wrong
In original firmware KRKTE is the same in 018DC and 018DH = 0.10478
CPU clock frequency in 018DH is higher than clock in 018DC.
This means that the conversion factor for KRKTE of 018DH will be different - 0.0001666 instead of 0.000111 of 018DC
« Last Edit: September 05, 2021, 08:38:20 AM by gremlin » Logged
Sandstorm3k
Sr. Member
****

Karma: +10/-14
Offline Offline

Posts: 403



« Reply #3 on: September 05, 2021, 09:46:40 AM »

Why not just crossflash this ECU?
Logged
Geomeo
Full Member
***

Karma: +10/-6
Offline Offline

Posts: 146


« Reply #4 on: September 05, 2021, 10:55:00 AM »

Why not just log some data like it’s been said one million+ times already?   People are only good as the information they receive. And the information you’re giving is_____.  <. You can family feud fill in the blank here.  Take logs of both good and bad. 
Logged
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1277



« Reply #5 on: September 05, 2021, 11:42:22 AM »

Why not just crossflash this ECU?

018DH is a 6.02 bootrom ecu, where as 018DC is a 5.12.

I still dont get why the need for the second ecu, sure beginner, but you cant really mess these ecus up if flashing through port , and even then a galletto /mpps all you need to recover.
Logged
BlackT
Hero Member
*****

Karma: +79/-39
Offline Offline

Posts: 1415



« Reply #6 on: September 05, 2021, 02:00:28 PM »

Post flash from spare ECU
Logged
1k.remap
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6



WWW
« Reply #7 on: September 20, 2021, 10:58:40 AM »

OK guys problem solved, KFMIOP has been modified incorrectly.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 17 queries. (Pretty URLs adds 0s, 0q)