Pages: 1 2 [3]
Author Topic: What is component protection active?  (Read 3001 times)
nupustas
Full Member
***

Karma: +1/-6
Offline Offline

Posts: 84


« Reply #30 on: January 13, 2022, 09:16:39 PM »

Nah.  Im just looking at the area above 5k. I have adjusted ldrxn up again and again, but requested doesnt change at all.  It keeps tapering downward. Its as if i could tell ldrxn to request 40lbs and it would still end up with the same 18lb request.

Kfmirl and kflhbn are both set much higher. So i dont know whats limiting it.

Could it be kfmiop?  S4wiki says not to touch this though?

You set kfmirl much higher, but left kfmiop stock?
Logged
nyet
Administrator
Hero Member
*****

Karma: +549/-135
Offline Offline

Posts: 11768


WWW
« Reply #31 on: January 13, 2022, 10:24:43 PM »

No clue. You literally didn't log any of the load limiters - ldrlms, ldrlts or torque requests misopl1, milsol
« Last Edit: January 13, 2022, 10:28:03 PM by nyet » Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
tadope
Full Member
***

Karma: +1/-24
Offline Offline

Posts: 194


« Reply #32 on: January 13, 2022, 11:12:08 PM »

You set kfmirl much higher, but left kfmiop stock?

Yep. I literally haven't read anywhere saying that you should raise kfmiop.  S4wiki literally says not to touch it.
Logged
nyet
Administrator
Hero Member
*****

Karma: +549/-135
Offline Offline

Posts: 11768


WWW
« Reply #33 on: January 14, 2022, 12:16:58 AM »

It doesn't say you shouldn't touch it. It says you shouldn't alter the max values of iop

The rest is here https://s4wiki.com/wiki/Tuning#Tuning_KFMIOP_and_KFMIZUFIL
« Last Edit: January 14, 2022, 12:20:59 AM by nyet » Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
nupustas
Full Member
***

Karma: +1/-6
Offline Offline

Posts: 84


« Reply #34 on: January 14, 2022, 11:16:16 AM »

Yep. I literally haven't read anywhere saying that you should raise kfmiop.  S4wiki literally says not to touch it.

KFMIOP - inverse map of KFMIRL. If you touch KFMIRL(for high power levels, i set only 2-3 last rows), you should set new KFMIOP axis, and interpolate KFMIOP map. This how i understand, this how it works for me. After that, you need to log, and maybe adjust some areas. Anyway, it's very good start for tweaking these maps
Logged
tadope
Full Member
***

Karma: +1/-24
Offline Offline

Posts: 194


« Reply #35 on: January 14, 2022, 11:01:13 PM »

Yeah i'm having trouble understanding how to adjust kfmiop.
If I adjust kfmiop down to match the ammount kfmirl went up, then how do I do that? kfmirl is load # and kfmiop is  a %.
I mean I can guess it, but would be nice to be accurate.

So far, I upped kfmirl to 225 (for the map limit), and the kfmiop top axis to 225.  But the kfmiop values are stock.
SO then doesn't that mean that the top row of kfmiop is naturally lowered because the top axis is bigger so the top value is lower?

Also I saw in the community 1.8t stage1+ file, the kfmirl and kfmiop were both raised UP.  ??  So the community proj is in error?

No clue. You literally didn't log any of the load limiters - ldrlms, ldrlts or torque requests misopl1, milsol

is it "milsol" or "misol"  I couldn't find any milsol in my melogr but I did find misol.
I added all those to my logs from now on.
« Last Edit: January 14, 2022, 11:07:04 PM by tadope » Logged
nyet
Administrator
Hero Member
*****

Karma: +549/-135
Offline Offline

Posts: 11768


WWW
« Reply #36 on: January 15, 2022, 09:06:25 AM »

is it "milsol" or "misol"  I couldn't find any milsol in my melogr but I did find misol.
I added all those to my logs from now on.
milsol, but you'll need to disassemble to find it, since me7info won't extract it. sadly, me7info is abandonware. Someday someone will make a drop in replacement for it and other vars can be added.

You'll also want the other items mentioned in that section.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
tadope
Full Member
***

Karma: +1/-24
Offline Offline

Posts: 194


« Reply #37 on: January 15, 2022, 02:41:00 PM »

Ahhhhhhh i got it!!!
I'm a total dummy.
It was kfdhbn the whole time.
I had changed the top row like other maps not thinking that its temperature based not load based.

Oops. Haha. Ok my boost request is controlled now
Logged
tadope
Full Member
***

Karma: +1/-24
Offline Offline

Posts: 194


« Reply #38 on: January 17, 2022, 08:27:13 AM »

KFMIOP - inverse map of KFMIRL. If you touch KFMIRL(for high power levels, i set only 2-3 last rows), you should set new KFMIOP axis, and interpolate KFMIOP map. This how i understand, this how it works for me. After that, you need to log, and maybe adjust some areas. Anyway, it's very good start for tweaking these maps

Thanks!
Logged
Pages: 1 2 [3]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 18 queries. (Pretty URLs adds 0s, 0q)