NefMoto > Technical > Tuning > MED9.5 - keeping fuel trims when removing sensors
Pages: [1]
« previous next »
Author Topic: MED9.5 - keeping fuel trims when removing sensors  (Read 2117 times)
drbluetongue
Jr. Member
**

Karma: +4/-1
Offline Offline

Posts: 42
« on: October 11, 2021, 03:42:42 PM »
Hi guys,

I've been searching the forum and FR and from my understanding, there is no ESKONF on MED9.

What section do I need to look at in the MED9 FR to specify if a sensor or relay/motor is installed in the car - so I can keep my LTFT?

For example, from what I searched here I can disable the N80 valve diagnostics/DTCs with CWPSTEVE and CLATEVE - but I still lose fuel trims if unplugged.

Same with my EGR being unplugged. Currently I have it plugged in but disabled with CWAGR and 0'd AGR CLA tables.

Can someone please point me in the right direction?

Thanks!
« Last Edit: October 11, 2021, 03:49:43 PM by drbluetongue » Logged
prj
Hero Member
*****

Karma: +1072/-480
Online Online

Posts: 6035
« Reply #1 on: October 12, 2021, 04:54:41 AM »
Set everything that starts with "CLA" back to stock.
If you get any codes that's why your trims are not working.

You need to disable diags and not turn off fault classes.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
drbluetongue
Jr. Member
**

Karma: +4/-1
Offline Offline

Posts: 42
« Reply #2 on: October 12, 2021, 11:52:01 AM »
Quote from: prj on October 12, 2021, 04:54:41 AM
Set everything that starts with "CLA" back to stock.
If you get any codes that's why your trims are not working.

You need to disable diags and not turn off fault classes.

Thanks!
Logged
drbluetongue
Jr. Member
**

Karma: +4/-1
Offline Offline

Posts: 42
« Reply #3 on: October 17, 2021, 05:13:06 PM »
Editing just CWPSTEVE works fine. No codes. Thanks PRJ.
Logged
drbluetongue
Jr. Member
**

Karma: +4/-1
Offline Offline

Posts: 42
« Reply #4 on: November 17, 2021, 10:02:12 PM »
Setting TMTE to max value helped my lumpy idle in stratified mode (it was expecting the valve to be working).
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 22, 2024, 02:13:59 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 16 queries. (Pretty URLs adds 0s, 0q)