Pages: [1]
Author Topic: PQ35 white FIS cluster with ASR MK70 possibile?  (Read 2584 times)
666tdi
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 12


« on: October 23, 2021, 03:49:36 AM »

Hi,

Is it possibile to make white FIS 5N0920871B working with an old ASR MK70 1K0907379P without fault messages on LCD and annoying sounds?
Replace to newer ASR for example 1K0907379AK from mkVI can help or it must be ESP MK60?

Thanks.
Logged
666tdi
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 12


« Reply #1 on: October 26, 2021, 11:48:36 AM »

Tried 1K0907379AK ASR MK70M, it worked a bit better because ESP fault message disappeared from FIS and beeps were gone but in the ABS module was DTC 01044 wrong coding 008 implausible signal, ABS and brake lamps unfortunatelly didn't disappear...

In ABS coding DSR was disabled because it caused G85 related faults at the begining.

Some people says that it can be related to region coding in dash but tried different and it didn't changed anything in my case.
Logged
cherry
Sr. Member
****

Karma: +26/-2
Offline Offline

Posts: 260


« Reply #2 on: October 26, 2021, 05:20:49 PM »

The wrong coding error could be due to missing coding bridge. Check wiring diagram from your car with such type of unit.
Logged
666tdi
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 12


« Reply #3 on: October 26, 2021, 10:05:59 PM »

Bridge was at pins 19-22 and I've changed it to 17-22 before putting "new" unit. With old dash new unit worked without DTC.

Btw its interesting that in Jetta mkVI was second bridge too.
The other thing is that new dash is 4WD and rest is FWD, doesn't know if it matters.

Edit:

Stupid mistake, ABS has this error if immo in dash is off...
« Last Edit: October 27, 2021, 01:22:41 AM by 666tdi » Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 17 queries. (Pretty URLs adds 0s, 0q)