pointers tuning M3.8.3 where to start

Pages: [1] 2

« previous next »

Author

Topic: pointers tuning M3.8.3 where to start (Read 30485 times)

airtite

Hero Member

Karma: +13/-3
Offline

Offline

Posts: 741

	pointers tuning M3.8.3 where to start « on: May 24, 2012, 01:08:17 AM »

Hi

I have searched and searched but cant find too much info on this, could someone give me a quick breakdown on what maps need to be changed for a stage1 tune?

Thanks


	Logged

@lq!

Full Member

Karma: +2/-0
Offline

Offline

Posts: 62

	Re: pointers tuning M3.8.3 where to start « Reply #1 on: May 24, 2012, 04:23:23 AM »

Hi,

usually include the following..

Lambdakennfeld bei Teillast
Berechnung aus Drosselklappenwinkel, Nockenwelle spät
Drehzahlbegrenzer
LDR-Sollwertbegrenzung
Kennfeld LDR-Sollwert
Zündwinkelkennfeld
Lastschwelle für Turbo-Überladeabschneiden
Kennfeld Höhenkorrektur für LDR-Sollwert
Luftmassendurchsatz ML-Schwelle für B_maxflr-Diagnose HFM/HLM
TV - Kennfeld für LDR


	Logged

airtite

Hero Member

Karma: +13/-3
Offline

Offline

Posts: 741

	Re: pointers tuning M3.8.3 where to start « Reply #2 on: May 24, 2012, 11:15:29 PM »

Thank you


	Logged

carsey

Sr. Member

Karma: +7/-4
Offline

Offline

Posts: 401

	Re: pointers tuning M3.8.3 where to start « Reply #3 on: June 04, 2012, 08:50:09 AM »

What do each of the maps do? such as load maps and lambda.

I know what are the timing and lambda maps, fairly sure which ones are load.


	Logged

aef

Hero Member

Karma: +69/-46
Offline

Offline

Posts: 1600

	Re: pointers tuning M3.8.3 where to start « Reply #4 on: May 07, 2013, 05:42:40 AM »

Is there no hard rev limiter in the M3.8.3 ?

While driving it feels like running into a wall, its no typical bambambam sound.

DTC: 00543 035 Drehzahl nach Maximum überschritten


	Logged

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: pointers tuning M3.8.3 where to start « Reply #5 on: May 07, 2013, 09:01:54 AM »

Far as I can tell it's calculated. What flash number?


	Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM

aef

Hero Member

Karma: +69/-46
Offline

Offline

Posts: 1600

	Re: pointers tuning M3.8.3 where to start « Reply #6 on: May 07, 2013, 09:13:29 AM »

flash number?

06A906018AQ - D03 - 0261204678 - 1037358108 - 0x3939.Ori


	Logged

automan001

Full Member

Karma: +47/-0
Offline

Offline

Posts: 153

	Re: pointers tuning M3.8.3 where to start « Reply #7 on: May 22, 2013, 05:09:30 AM »

Quote from: carsey on June 04, 2012, 08:50:09 AM

What do each of the maps do? such as load maps and lambda.
I know what are the timing and lambda maps, fairly sure which ones are load.

It will be easy to understand if you compare them with maps playing simiral role in well documented ME 7.5. I think they can be compared as follows (ME7.5 vs ME3.8.x/ME5.9.x):
LAMFA (+ KFLBTS & KFDLBTS & KFFDLBTS + KFLAMKR & KFLAMKRL + ?KFLF) = (KFLF) Lambdakennfeld bei Teillast
NMAX = (NMAX) Drehzahlbegrenzung
LDRXN = (LDSMXN) LDR-Sollwertbegrenzung
?KFMIRL = (KFLDS) Kennfeld LDR-Sollwert
?KFMIOP = (KFTLWS) Kennfeld für tL - Berechnung aus Drosselklappenwinkel, Nockenwelle spät
KFZW = (KFZW) Zündwinkelkennfeld
?KFDLULS = (KFLUL) - Lastschwelle für Turbo-Überladeabschneiden
?KFLDHBN = (KFLDSHK) Kennfeld Höhenkorrektur für LDR-Sollwert
KFMLDMX = (KFMLDMX) Luftmassendurchsatz ML-Schwelle für B_maxflr-Diagnose HFM/HLM
KFLDRL = (KFLDTV) TV - Kennfeld für LDR


« Last Edit: May 22, 2013, 05:11:59 AM by automan001 »	Logged

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: pointers tuning M3.8.3 where to start « Reply #8 on: May 24, 2013, 11:52:29 PM »

Quote from: automan001 on May 22, 2013, 05:09:30 AM

This was very helpful. Thank you. Anyone have any pre-me7 reading recomendations? I'm interested in m3.83/5.92, but anything I need to read prior to getting into that is welcome.


	Logged

Bische

Sr. Member

Karma: +25/-4
Offline

Offline

Posts: 397

	Re: pointers tuning M3.8.3 where to start « Reply #9 on: May 25, 2013, 10:12:55 PM »

Anyone have a good understandig of the fuel calculation?

From MAF sensor > Injector PW


	Logged

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: pointers tuning M3.8.3 where to start « Reply #10 on: May 25, 2013, 10:19:35 PM »

I defined, translated, and categorized the SHIT out of the 557P file. Fueling is still a bit hazy though.


	Logged

Foti

Newbie

Karma: +0/-0
Offline

Offline

Posts: 11

	Re: pointers tuning M3.8.3 where to start « Reply #11 on: June 09, 2013, 07:39:41 PM »

Anyone have success disabling the Rear O2?

S4 wiki has:

CDKAT - Cat diagnosis in OBDII-Mode.
CWDLSAHK (0x18663) - Code word for probe aging after KAT[39]

but my 558M definition has neither.


	Logged

Novik

Newbie

Karma: +1/-0
Offline

Offline

Posts: 21

	Re: pointers tuning M3.8.3 where to start « Reply #12 on: June 19, 2013, 11:51:11 AM »

Maybe anyone share some info about how it works in 3.8.3 ?
Readed many info about ME7.5, but it not looks very similar to M3.8.3 to me.
Maybe some basic how it works in 3.8.3
- fuel
- boost

Thanks in advance


	Logged

overspeed

Sr. Member

Karma: +21/-5
Offline

Offline

Posts: 387

	Re: pointers tuning M3.8.3 where to start « Reply #13 on: June 19, 2013, 12:57:00 PM »

Very resumed:

1 - Load [ms/umdr] is opening time to obtain lambda =1

2 - Load = torque x factor

3 - ECU just request load (that is torque, that is translated to MAF reading through Grundanpassung KHFM) and pulse N75 accordly to reach the requested load

4- Fuel is only based on MAF reading with temperature and TPS corrections


	Logged

eliotroyano

Hero Member

Karma: +48/-8
Offline

Offline

Posts: 825

	Re: pointers tuning M3.8.3 where to start « Reply #14 on: June 20, 2013, 08:53:37 AM »

Quote from: ddillenger on May 24, 2013, 11:52:29 PM

This was very helpful. Thank you. Anyone have any pre-me7 reading recomendations? I'm interested in m3.83/5.92, but anything I need to read prior to getting into that is welcome.

Here is some info that I have collected. I think that I have more at home. I hope it will be useful.
Regards,


	Logged

Pages: [1] 2

« previous next »

Jump to:

Navigation

Personal Tools

November 22, 2024, 03:35:19 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search