Kejsi
Jr. Member
Karma: +1/-1
 Offline
Posts: 44
|
 |
« on: July 01, 2022, 12:45:43 PM »
|
|
|
Hi, I'm doing a 6hp19 to 1.8t me7.5 swap, the physical gearbox is already in place, the wires are also well connected, only the changes in the ECU have been made. So far I changed the coding in the eeprom ECU to automatic gearbox (only 5hp19) and changed the canvers, cwgc, FMOTC and Mdnorm at home in the ECU to the values from the automatic gearbox from 3.0tdi (automatic gearbox with A4 B7 3.0tdi) I have no errors in the engine controller, but in the gearbox I have one error with the wrong software version P0614. Do I have to change the tcu load now for the box to run well? There are people on the forum who did 6hp19 with me7. 1.1 but do not reply to messages
|
|
|
|
|
Logged
|
|
|
|
|
BlackT
|
|
« Reply #1 on: July 01, 2022, 12:48:46 PM »
|
|
|
You didn't PM me  |
|
|
|
|
Logged
|
|
|
|
Kejsi
Jr. Member
Karma: +1/-1
Offline
Posts: 44
|
|
« Reply #2 on: July 01, 2022, 01:03:27 PM »
|
|
|
You didn't PM me I wrote to stoti and to a few other people Did you change anything in tcu? Did you get rid of the bug from the wrong firmware version in tcu? And do you need to change nvquot 1-6 ?? |
|
|
|
|
Logged
|
|
|
|
dus
Newbie
Karma: +0/-0
Offline
Posts: 18
|
|
« Reply #3 on: July 04, 2022, 05:26:28 AM »
|
|
|
Hi, I'm doing a 6hp19 to 1.8t me7.5 swap, the physical gearbox is already in place, the wires are also well connected, only the changes in the ECU have been made. So far I changed the coding in the eeprom ECU to automatic gearbox (only 5hp19) and changed the canvers, cwgc, FMOTC and Mdnorm at home in the ECU to the values from the automatic gearbox from 3.0tdi (automatic gearbox with A4 B7 3.0tdi) I have no errors in the engine controller, but in the gearbox I have one error with the wrong software version P0614. Do I have to change the tcu load now for the box to run well? There are people on the forum who did 6hp19 with me7. 1.1 but do not reply to messages
ECU 8E0909518AK ? |
|
|
|
|
Logged
|
|
|
|
Kejsi
Jr. Member
Karma: +1/-1
Offline
Posts: 44
|
|
« Reply #4 on: July 04, 2022, 05:28:27 AM »
|
|
|
ECU 8E0909518AK ?
8E0 909 518 AQ |
|
|
|
|
Logged
|
|
|
|
|
BlackT
|
|
« Reply #5 on: July 04, 2022, 07:28:39 AM »
|
|
|
I wrote to stoti and to a few other people
1. Did you change anything in tcu?
2. Did you get rid of the bug from the wrong firmware version in tcu?
3. And do you need to change nvquot 1-6 ??
1. No 2. Yes 3. No |
|
|
|
|
Logged
|
|
|
|
|
_nameless
|
|
« Reply #6 on: July 07, 2022, 07:42:55 AM »
|
|
|
Ive answered these questions at least twice on the forum within the last 3 years you should be able to find the answer quite easy
|
|
|
|
|
Logged
|
Giving your mom a tuneup
|
|
|
|
_nameless
|
|
« Reply #7 on: July 07, 2022, 07:47:55 AM »
|
|
|
|
|
|
|
|
Logged
|
Giving your mom a tuneup
|
|
|
Kejsi
Jr. Member
Karma: +1/-1
Offline
Posts: 44
|
|
« Reply #8 on: July 07, 2022, 11:30:25 AM »
|
|
|
and how to make esp not to display these errors? I tried various encodings found on drive.ru and changed cwgrabh to 0 but still no response. Somewhere I found information to change CWKONFZ but I have 12 different addresses and I don't know which one to change for pics https://iv.pl/image/GIMNoH2https://iv.pl/image/GIMN21I |
|
|
|
« Last Edit: July 07, 2022, 11:32:08 AM by Kejsi »
|
Logged
|
|
|
|
Kejsi
Jr. Member
Karma: +1/-1
Offline
Posts: 44
|
|
« Reply #9 on: July 08, 2022, 10:48:40 AM »
|
|
|
sat with my laptop a little bit in the garage today and got rid of all the abs / esp bugs
There are two things left for me to do, decode the brake force sensor from the ECU (18320) and check why the error still appears, the signal of the desired acceleration in the gearbox (006273 should disappear because it reads can) I will also change CWGGVFZG
|
|
|
|
|
Logged
|
|
|
|
Kejsi
Jr. Member
Karma: +1/-1
Offline
Posts: 44
|
|
« Reply #10 on: August 06, 2022, 12:16:15 PM »
|
|
|
So I managed to run 6hp19 with 3.0tdi on the original driver with 1.8t me7.5.1 engine no errors, full communication can change gears like diesel so far, only I have to do the gearbox program. A colleague from the forum wrote me to upload the software from 4.2 to this gearbox, but once that I do not have a file and two at home, the only thing I have is odis e and other files are used there Maybe someone has a better idea how to change her gearshift thresholds? I also have access to flex and a ripped original file from the gearbox, I also add a short video in poor quality for yt how so far it changes gears https://youtube.com/shorts/HOW4IBGhF-4?feature=share |
|
|
|
|
Logged
|
|
|
|
|
BlackT
|
|
« Reply #11 on: August 06, 2022, 03:52:17 PM »
|
|
|
Have you manage to read gearbox file?
|
|
|
|
|
Logged
|
|
|
|
Kejsi
Jr. Member
Karma: +1/-1
Offline
Posts: 44
|
|
« Reply #12 on: August 06, 2022, 04:05:29 PM »
|
|
|
Have you manage to read gearbox file?
I read the file, I have a friend with flex and it reads the file via obd in the attachment the automatic box file |
|
|
|
|
Logged
|
|
|
|
|
BlackT
|
|
« Reply #13 on: August 07, 2022, 05:05:28 AM »
|
|
|
Can you give more info how you read it? I have 4.2 gearbox so I will try to read it and post here. Try to flash that file
|
|
|
|
|
Logged
|
|
|
|
Kejsi
Jr. Member
Karma: +1/-1
Offline
Posts: 44
|
|
« Reply #14 on: August 07, 2022, 05:15:53 AM »
|
|
|
https://www.magicmotorsport.com/flex/I have a friend who has this interface, if you have someone with this interface, you can easily download the file via the obd socket
|
|
|
|
|
Logged
|
|
|
|
|
