Pages: [1]
Author Topic: Me7 1.1 immobilizer turn off  (Read 4574 times)
Rick81
Full Member
***

Karma: +0/-10
Offline Offline

Posts: 75


« on: July 26, 2022, 08:16:56 PM »

Don't shoot me for asking . I would like to turn my immobilizer off. Can it be done on Me7 1.1 and how would I go about it .

Kind regards
Logged
elektronik13
Full Member
***

Karma: +10/-32
Offline Offline

Posts: 198


« Reply #1 on: July 26, 2022, 11:24:55 PM »

Don't shoot me for asking . I would like to turn my immobilizer off. Can it be done on Me7 1.1 and how would I go about it .

Kind regards
you need to read eeprom 95040 and insert here
Logged
Vollmer
Full Member
***

Karma: +14/-254
Offline Offline

Posts: 78

Professional Cat Herder


« Reply #2 on: July 28, 2022, 09:59:56 AM »

Don't shoot me for asking .

...

Kind regards

Wonderful Vibes around here!
Logged

Volvo HALL of SHAME:

Guitar24t aka Robert Hilton
SparkyR aka Brandon Halme
Prometey1982 aka Artem Vasiliev
MAXX ECU - Brett Willet
VIDA Leach - David Leech

Useless Twats:
PRJ - Dmitri from Estonia
Rick81
Full Member
***

Karma: +0/-10
Offline Offline

Posts: 75


« Reply #3 on: July 28, 2022, 12:58:01 PM »

Can it be done in boot mode?
Logged
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2177


« Reply #4 on: July 28, 2022, 11:45:47 PM »

Yes.  Might as well read in boot because you'll need to write in boot.

Argdubs tool to read in boot (Y is Port Number, use Device Manager to check).
Open cmd (start, run, cmd) and change directory to me7eeprom folder.  Type something like:
cd c:\users\yourusername\docs\argdubstool\

then type:
me7eeprom --bootmode 95040 -rpY xx.bin

Copy xx.bin from Argdub tool folder to eepromtool folder.

eepromtool to edit.  Use CMD and change directory (cd...) to and type:
eepromtool --in "xx.bin" --out "xx_immooff.bin" --immo off

Copy xx_immooff.bin from eepromtool folder back to Argdubs tool folder.

Argdubs tool to write back in boot:
me7eeprom --bootmode 95040 -wpY xx_immooff.bin
Logged
bamofo
Sr. Member
****

Karma: +34/-3
Offline Offline

Posts: 420


« Reply #5 on: August 03, 2022, 12:42:52 PM »

For ME7.1.1 you will probably have to do 95P08. you will have to look at the chip on the back though. 95040 will get you half of the eeprom, which has the immo in it, but still not best practice.
Logged
Rick81
Full Member
***

Karma: +0/-10
Offline Offline

Posts: 75


« Reply #6 on: August 05, 2022, 10:37:28 PM »

I'm I'm using the boot tool can I use the ftr32rl cable ?
Logged
Rick81
Full Member
***

Karma: +0/-10
Offline Offline

Posts: 75


« Reply #7 on: August 06, 2022, 01:58:06 AM »

Ive downloadedthe argdub tool extracted it and nothing happens
Logged
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2177


« Reply #8 on: August 08, 2022, 04:02:47 AM »

Did you read what I posted?
Logged
Rick81
Full Member
***

Karma: +0/-10
Offline Offline

Posts: 75


« Reply #9 on: August 10, 2022, 12:54:50 AM »

Hi yes went into command prompt and said correct path not specified
Logged
Rick81
Full Member
***

Karma: +0/-10
Offline Offline

Posts: 75


« Reply #10 on: October 06, 2022, 05:29:41 PM »

I've got a bit more time to spare over the weekend. I will have a look at the immobilizer delete.  I'm assuming here I'm downloading in boot mode with nefmoto software.

Using the argdubs tool I did have a brief look but I will try again and see what happens
Logged
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2177


« Reply #11 on: October 06, 2022, 11:57:49 PM »

No, not nefmoto.  It has to be ArgDubs tool.
Logged
Rick81
Full Member
***

Karma: +0/-10
Offline Offline

Posts: 75


« Reply #12 on: October 15, 2022, 12:56:14 PM »

Thanks so download in boot mode with argdubs  tool

Thanks
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.024 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)