Pages: [1]
Author Topic: Does MPPS v18 work with VCDS?  (Read 2037 times)
Kacpern
Newbie
*

Karma: +0/-3
Offline Offline

Posts: 19


« on: November 22, 2022, 09:16:49 AM »

Hello, does the MPPS V18 cable work with VCDS and NefMoto?
Logged
adam-
Hero Member
*****

Karma: +118/-33
Offline Offline

Posts: 2123


« Reply #1 on: November 22, 2022, 09:37:10 AM »

No.
Logged
Kacpern
Newbie
*

Karma: +0/-3
Offline Offline

Posts: 19


« Reply #2 on: November 22, 2022, 09:42:54 AM »

So this mpps cannot be used as a diagnostic cable?
Logged
IamwhoIam
Hero Member
*****

Karma: +37/-70
Offline Offline

Posts: 959


« Reply #3 on: November 22, 2022, 10:19:28 AM »

of course you can, just connect it to your computer's serial port and use VCDS 3.11
Logged

I have no logs because I have a boost gauge (makes things easier)
royce5950
Sr. Member
****

Karma: +14/-27
Offline Offline

Posts: 325


http://v3tunedfiles.com/


WWW
« Reply #4 on: January 11, 2023, 05:20:58 AM »

It can not be used as a vcds cable.. need a vcds-lite cable, visit link in sig. Otherwise full vcds cables require certain chipset including a particular ATMEGA chip among one or two others.
Logged

Purchase Tuned Files Ready To Be FlashedFor Audi / VW 1.8T & 2.0T Engines ➡️ https://v3tunedfiles.comSome Tuned Files Priced As Low As $50Need Diagnostic/Flash/Bench USB Cable? ➡️ https://cutt.ly/obdcable
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 18 queries. (Pretty URLs adds 0s, 0q)