NefMoto > Technical > Data Logging > Free ME7 Logging with VehiCAL Logger
Pages: 1 ... 3 4 [5]
« previous next »
Author Topic: Free ME7 Logging with VehiCAL Logger  (Read 32749 times)
darylw357
Newbie
*

Karma: +0/-0
Online Online

Posts: 3
« Reply #60 on: December 23, 2024, 09:11:47 AM »
I've used me7logger in the past but now I have a VX220 with the Z20LET engine and ME1.5.5 ECU. I've tried using opcom+cable but it's slow and limited rather like vcds is. I see my ecu should be supported under the adavanced protocols but what variables would this give me acccess to? Reluctant to buy a J2534 cable etc until I know this will do the job.
« Last Edit: December 23, 2024, 09:13:56 AM by darylw357 » Logged
prj
Hero Member
*****

Karma: +1074/-500
Offline Offline

Posts: 6072
« Reply #61 on: December 23, 2024, 09:33:00 AM »
All of the variables, only bitfields are missing in case of generated def.

And a proper J2534 cable is a good investment, there's thousands of different software applications that work with it.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
darylw357
Newbie
*

Karma: +0/-0
Online Online

Posts: 3
« Reply #62 on: Yesterday at 05:52:32 AM »
Thanks I'll give it a try then with a cheap GODIAG cable and if thats no good then I'm looking at a Tactrix Openport 2.0.
Logged
prj
Hero Member
*****

Karma: +1074/-500
Offline Offline

Posts: 6072
« Reply #63 on: Yesterday at 07:19:11 AM »
Quote from: darylw357 on Yesterday at 05:52:32 AM
Thanks I'll give it a try then with a cheap GODIAG cable and if thats no good then I'm looking at a Tactrix Openport 2.0.
That cable does not work, not standards compliant:
https://docs.vehical.net/logger_tested_devices
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2817
« Reply #64 on: Yesterday at 11:27:55 AM »
Quote from: darylw357 on Yesterday at 05:52:32 AM
Thanks I'll give it a try then with a cheap GODIAG cable and if thats no good then I'm looking at a Tactrix Openport 2.0.
They don't work on me7, they still work on med9 and med17
Logged
Giving your mom a tuneup
prj
Hero Member
*****

Karma: +1074/-500
Offline Offline

Posts: 6072
« Reply #65 on: Yesterday at 03:32:36 PM »
Quote from: _nameless on Yesterday at 11:27:55 AM
They don't work on me7, they still work on med9 and med17

Only on TP2.0. Those cables don't support ISO-TP in hardware properly.
Possible to work around it via muxer, but why bother?
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
darylw357
Newbie
*

Karma: +0/-0
Online Online

Posts: 3
« Reply #66 on: Today at 06:32:26 AM »
But the Tactrix Openport 2.0 is OK ? It looks like the most reasonably priced of the genuine cables.
Logged
prj
Hero Member
*****

Karma: +1074/-500
Offline Offline

Posts: 6072
« Reply #67 on: Today at 08:01:38 AM »
Quote from: darylw357 on Today at 06:32:26 AM
But the Tactrix Openport 2.0 is OK ? It looks like the most reasonably priced of the genuine cables.
It's the cable that the development is done with, because it is the most commonly used.
I can't say it's "the best", because it has some software limitations, and an extremely shitty failure prone mini-usb connection, but it should work quite well with every conceivable app out there.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Pages: 1 ... 3 4 [5]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • December 25, 2024, 11:22:51 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.504 seconds with 17 queries. (Pretty URLs adds 0s, 0q)