Just rematch the ecu immo with vcds like you would when you change the ecu from a different car. Immo off is only needed when you have broken hardware or when the ecu is fitted to a car with immo that cannot be matched with the ecu you fitted or car without immo.

Yeah that was my thought also, but if it is really immo that is kicking in then it should just be a immo rematch. Though I have cross flashed every BEX software version I have found and all off them have worked out without the need to touch immo because it should not affect the 95040 eeprom in any way.

Here are all ori bins I have tested and all of them seem to work out of the box. RDW bin felt weird compared to the EURO 4 bins. Was clunky on gear changes and it rolled a heck longer without cutting injectors in engine braking situation and the cutoff was also not so smooth.