Pages: 1 2 3 [4]
Author Topic: Tune Files Ready For Download  (Read 31551 times)
Spen Holder
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 19


« Reply #45 on: February 13, 2024, 07:14:24 PM »

My brother has a 9th gen civic, we just did the clutch on it and he has misfires at idle and hardly has any throttle response. After doing some reading it seems this is a normal thing on this POS when you do a lightweight flywheel, he was considering Flash Pro. The only thing he really wants is the car to run normal again and 800 bucks just for the hardware to flash the ecu... That's a bit steep for what he needs done in my option. Anyway, I remembered seeing some Honda files you have listed for sale, and I see you offer a "fix" file for a 2013 Si, are the files for 12 and 13 compatible, will this file work for his car? Also, what tool are you using or what would you recommend I use to flash the car? Thanks!   
Logged
_nameless
Hero Member
*****

Karma: +319/-444
Offline Offline

Posts: 2637



« Reply #46 on: February 13, 2024, 09:06:48 PM »

Eh, best off just reading the original file out and I can make the necessary calibration changes on that. If you have a j2534 cable I can flash it remotely. 
Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
Spen Holder
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 19


« Reply #47 on: February 13, 2024, 10:09:39 PM »

Eh, best off just reading the original file out and I can make the necessary calibration changes on that. If you have a j2534 cable I can flash it remotely. 
Cool, I have a tactrix cable. Ill send you a pm.
 
Logged
_nameless
Hero Member
*****

Karma: +319/-444
Offline Offline

Posts: 2637



« Reply #48 on: Today at 12:39:33 AM »

Added 2 files 2012 GD Fit full bolt ons e85 emissions, speed lim, immo off, +18hp over stock and + torque over stock at the wheels. Requires full bolt ons. Also added 2012 Civic Si stage 1 tune for lightweight / single mass flywheel. Normally when doing a lightweight flywheels on the 9th gen civics you will endup with misfire codes and limp mode. My solution fixes this issue and makes the car run as normal. Tune is optimized for 91 octane, speed limit removed, reideness patched and hardware coded out, tuned vtec and cam angles for max torque, decent mid range gains with cam angle mapping. This car was street tuned so I do not have final numbers however it was a decent gain with exhaust and intake. If yo have any questions feel free to send me a message
 https://instatune.sellfy.store/y/
Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
Pages: 1 2 3 [4]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 18 queries. (Pretty URLs adds 0s, 0q)