Dev Blog
Forum
Wiki
About
NefMoto
>
Technical
>
Flashing and Chipping
>
ST10 RIPPER Easy,Complete backup of ME7.1.1 on OBD!
Pages: [
1
]
« previous
next »
Author
Topic: ST10 RIPPER Easy,Complete backup of ME7.1.1 on OBD! (Read 4297 times)
R32Dude
Full Member
Karma: +45/-10
Offline
Posts: 246
ST10 RIPPER Easy,Complete backup of ME7.1.1 on OBD!
« on: April 25, 2023, 01:00:27 AM »
ST10 ME7.1.1 Ripper
-------------------
Allows the three important ROMs to be extracted without the need to remove ECU from car. These can be used for studying with Ida, winols etc. They can also be used to clone a similar family ECU on the bench with other tools such as MPPS .
Main Features:
Easily extract Flash, mpc and eeprom in a few minutes from OBD port.
Flash takes 4-5 mins, mpc 3-4 mins and eeprom 1 min (after extracting flash first)
NO need to remove ECU from the car!!
-------------------------------------
Only works on ST10F ME7.1.1, haven't tried other ME7.X.X
Will NOT work on C167 based ECUs including ST10C167!
Personally tested on 2.5 Beetle 07K906032Q & Mk5 R32 022906032KG,CE
Requirements: KKL cable with COM port drivers - in your COM port settings, advanced, change latency to 2 instead of 16.
ECU must have KLine connection to OBD port.
Intallation: Portable, simply extract whole folder and run. Don't run from USB. Change COM port from 3 to yours.
If it works for you give me a +, if you get error messages take a screenshot, I might be able to help.
The code is quite flexible, but I don't have any code for ST10s other than 7.1.1 so it may not work for other variants.
Remember though, 7.1.1 on C167/ST10C167 won't work.
It might be able to backup tuned ECUs too, if they didn't play with KWP services.
Have fun.
«
Last Edit: November 14, 2023, 06:04:02 AM by R32Dude
»
Logged
nyet
Administrator
Hero Member
Karma: +604/-166
Offline
Posts: 12233
Re: ST10 RIPPER Easy backup of ME7.1.1 on OBD
« Reply #1 on: April 25, 2023, 02:59:25 PM »
github repo?
Logged
ME7.1 tuning guide
(READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x
Please do not ask me for tunes. I'm here to help people make their own.
Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Mangusta
Newbie
Karma: +1/-0
Offline
Posts: 2
Re: ST10 RIPPER Easy,Complete backup of ME7.1.1 on OBD!
« Reply #2 on: June 24, 2023, 12:34:38 AM »
Worked very well for me first time. I finally managed to get my ecu cloned by a friend. He is quite knowledgeable, 10 years, and told me I had to remove the ecu from the car. Thanks to this there was no need. I could never find something that could get all three sections easily.
Thank you for sharing sir.
Logged
EuroXs4
Full Member
Karma: +15/-31
Offline
Posts: 209
Re: ST10 RIPPER Easy,Complete backup of ME7.1.1 on OBD!
« Reply #3 on: October 06, 2023, 05:30:59 PM »
Is there a way to get this to work with C167 processor?
Logged
Geomeo
Full Member
Karma: +10/-6
Offline
Posts: 146
Re: ST10 RIPPER Easy,Complete backup of ME7.1.1 on OBD!
« Reply #4 on: October 06, 2023, 05:37:07 PM »
Quote from: EuroXs4 on October 06, 2023, 05:30:59 PM
Is there a way to get this to work with C167 processor?
Now I could be wrong here, but since OP's first post says the following:
"Will NOT work on C167 based ECUs"
And then
"remember though, 7.1.1 on C167 won't work."
Probably not.
Logged
nyet
Administrator
Hero Member
Karma: +604/-166
Offline
Posts: 12233
Re: ST10 RIPPER Easy,Complete backup of ME7.1.1 on OBD!
« Reply #5 on: October 06, 2023, 10:32:29 PM »
Quote from: EuroXs4 on October 06, 2023, 05:30:59 PM
Is there a way to get this to work with C167 processor?
The nefmoto flasher?
Logged
ME7.1 tuning guide
(READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x
Please do not ask me for tunes. I'm here to help people make their own.
Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> Introductions
=> General Discussion
-----------------------------
Noob Zone
-----------------------------
=> Noob Questions
=> Noob Guides and FAQs
-----------------------------
Technical
-----------------------------
=> NefMoto Software
=> Tuning
===> Documents & Helpers & How To's
===> Community Projects
=> Diagnostics
=> Flashing and Chipping
=> Cluster and Immobilizer
===> ECU EEPROM images
===> Original Cluster dumps
===> Original Cluster dump requests
=> Data Logging
=> Reverse Engineering
=> Communication Protocols
-----------------------------
ECU Files
-----------------------------
=> ECU Definition Files
===> ECU Definition File Requests
=> Original ECU Files
===> Original ECU File Requests
=> Checksum Update Requests
-----------------------------
Vehicles
-----------------------------
=> Vehicle Tech
=> Project Cars
-----------------------------
Regional
-----------------------------
=> Canadian Regional Discussion
=> US Regional Discussion
-----------------------------
Classifieds
-----------------------------
=> For Sale
=> Wanted
=> Services
-----------------------------
Miscellaneous
-----------------------------
=> Off Topic
=> Forum Tech Support
=> Bizarro Messages Posted by Bots and Spammers
Navigation
Home
Help
Login
Register
Personal Tools
April 25, 2024, 11:44:23 PM
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Search
Advanced Search
Loading...