Dev Blog
Forum
Wiki
About
NefMoto
>
Technical
>
NefMoto Software
>
nefmoto not recognizing any cable
Pages: [
1
]
« previous
next »
Author
Topic: nefmoto not recognizing any cable (Read 6737 times)
eurowabbit
Newbie
Karma: +0/-4
Offline
Posts: 14
nefmoto not recognizing any cable
« on: July 13, 2023, 08:11:07 PM »
ive tried a blue vag kkl, a red obdlink sx and a vagcom hex-net. nefmoto wont recognize any of them and yes the drivers are correct. please help. i need this car back on the road literally last week.
Logged
eurowabbit
Newbie
Karma: +0/-4
Offline
Posts: 14
Re: nefmoto not recognizing any cable
« Reply #1 on: July 13, 2023, 08:24:22 PM »
the red obdlink sx is the only one that pops up on nefmoto now. when i plugged it back in the second time it gave me the option to install drivers. but it wont communicate with the ecu. when i click connect it pops up with 'Failed to read test echo from FTDI device' in the status window.
Logged
eurowabbit
Newbie
Karma: +0/-4
Offline
Posts: 14
Re: nefmoto not recognizing any cable
« Reply #2 on: July 14, 2023, 11:48:01 AM »
ive redone setup twice now and still nefmoto wont recognize my cable even installed an earlier version of nef moto. still not recognizing my cable.
Logged
justinvw2646
Full Member
Karma: +17/-3
Offline
Posts: 192
Re: nefmoto not recognizing any cable
« Reply #3 on: July 14, 2023, 08:09:35 PM »
https://www.ross-tech.com/vag-com/usb/virtual-com-port.php
When using the vcds cable you also need to launch vagcom and put it in dumb mode
Logged
eurowabbit
Newbie
Karma: +0/-4
Offline
Posts: 14
Re: nefmoto not recognizing any cable
« Reply #4 on: July 17, 2023, 11:16:25 AM »
Quote from: justinvw2646 on July 14, 2023, 08:09:35 PM
https://www.ross-tech.com/vag-com/usb/virtual-com-port.php
When using the vcds cable you also need to launch vagcom and put it in dumb mode
i have a hex-net vag com cable so im not able to do that with it. the blue kkl cable i have used to work. i was able to a year or two ago mess with some settings on the cluster. i just cant get anything to recognize the kkl cable at all.
Logged
eurowabbit
Newbie
Karma: +0/-4
Offline
Posts: 14
Re: nefmoto not recognizing any cable
« Reply #5 on: September 12, 2023, 09:56:42 PM »
I fixed it. Used vag commander 1.19 and changed com port in device manager and vag commander to com 2 and it worked.
Sent from my SM-S908U using Tapatalk
Logged
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> Introductions
=> General Discussion
-----------------------------
Noob Zone
-----------------------------
=> Noob Questions
=> Noob Guides and FAQs
-----------------------------
Technical
-----------------------------
=> NefMoto Software
=> Tuning
===> Documents & Helpers & How To's
===> Community Projects
=> Diagnostics
=> Flashing and Chipping
=> Cluster and Immobilizer
===> ECU EEPROM images
===> Original Cluster dumps
===> Original Cluster dump requests
=> Data Logging
=> Reverse Engineering
=> Communication Protocols
-----------------------------
ECU Files
-----------------------------
=> ECU Definition Files
===> ECU Definition File Requests
=> Original ECU Files
===> Original ECU File Requests
=> Checksum Update Requests
-----------------------------
Vehicles
-----------------------------
=> Vehicle Tech
=> Project Cars
-----------------------------
Regional
-----------------------------
=> Canadian Regional Discussion
=> US Regional Discussion
-----------------------------
Classifieds
-----------------------------
=> For Sale
=> Wanted
=> Services
-----------------------------
Miscellaneous
-----------------------------
=> Off Topic
=> Forum Tech Support
=> Bizarro Messages Posted by Bots and Spammers
Navigation
Home
Help
Login
Register
Personal Tools
November 22, 2024, 01:25:36 AM
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Search
Advanced Search
Loading...
