Hello all couple of years back i did a manual swap on my Allroad 4.2 and used 6 speed 01E.
Company that supplied the kit from USA also flashed my original ECU i sent them but with a file from s4 i believe as i was not told what they did.
Of course no cruise control and evap pump dtc and a couple other minor codes.
Decided to install an s4 ecu from 6 speed to see if that would be better. Obtained sku and adapted said s4 ecu 8E0 560 and been running that since no problems except no cruise control and couple minor codes only eg exhaust flap and steering wheel buttons etc no evap code so that was great.
Thought about time to see if i can get cruise working and decided to try an S6 4D0907559E ecu i stumbled across.
all my ecu are ME7.1.1
Obtained skc and adapted 559e ecu no problem there but engine cranks and will no fire up. No codes with vcds which i thought was odd but there maybe pinout differences between S6 and Allroad ecu and why engine does not run.
If anyone knows way to get this ecu run that would be helpfull by the way.

So though no drama continue to read the 559E file and save and swap allroad ecu into car and flash the 559e file.
Well stuffed that up i did as memory layout did not authenticate and as i got up to go into the other room and check online on other computer a fix for this i knocked my marble mouse and it clicked on ok flash anyway!! Result no no vcds or nefmoto flasher connections.
This was end of my log if anyone know what i did wrong.15/Oct/2023 09:58:12.154: LOG: Sent message with service ID RequestRoutineResultsByLocalIdentifier
15/Oct/2023 09:58:12.169: LOG: Received message with service ID: NegativeResponse
15/Oct/2023 09:58:12.169: LOG: Received negative response for service ID: RequestRoutineResultsByLocalIdentifier, with response code: RoutineNotCompleteOrServiceInProgress
15/Oct/2023 09:58:12.172: LOG: Sent message with service ID RequestRoutineResultsByLocalIdentifier
15/Oct/2023 09:58:12.190: LOG: Received message with service ID: RequestRoutineResultsByLocalIdentifierPositiveResponse
15/Oct/2023 09:58:12.190: LOG: Checksum is correct.
15/Oct/2023 09:58:12.190: USER: Flash checksum matches new data, flashing was successful.
15/Oct/2023 09:58:12.191: USER: Disconnecting from ECU to force it to recognize successful completion of flash write.
15/Oct/2023 09:58:12.193: USER: Writing ECU flash memory succeeded. Wrote 16 of 16 sectors in flash memory.
Flashing time was 00:04:29.
15/Oct/2023 09:58:14.675: LOG: Sent message with service ID TesterPresent
15/Oct/2023 09:58:14.694: LOG: Received message with service ID: TesterPresentPositiveReponse
15/Oct/2023 09:58:17.179: LOG: Sent message with service ID TesterPresent
15/Oct/2023 09:58:17.200: LOG: Received message with service ID: TesterPresentPositiveReponse
15/Oct/2023 09:58:19.682: LOG: Sent message with service ID TesterPresent
15/Oct/2023 09:58:19.697: LOG: Received message with service ID: TesterPresentPositiveReponse
15/Oct/2023 09:58:22.185: LOG: Sent message with service ID TesterPresent
15/Oct/2023 09:58:22.201: LOG: Received message with service ID: TesterPresentPositiveReponse
15/Oct/2023 09:58:24.686: LOG: Sent message with service ID TesterPresent
15/Oct/2023 09:58:24.706: LOG: Received message with service ID: TesterPresentPositiveReponse
15/Oct/2023 09:58:27.188: LOG: Sent message with service ID TesterPresent
15/Oct/2023 09:58:27.202: LOG: Received message with service ID: TesterPresentPositiveReponse
15/Oct/2023 09:58:29.692: LOG: Sent message with service ID TesterPresent
15/Oct/2023 09:58:29.712: LOG: Received message with service ID: TesterPresentPositiveReponse
15/Oct/2023 09:58:32.175: LOG: User Prompt - Title: Writing ECU Flash Memory Complete Message: Writing ECU flash memory succeeded. Wrote 16 of 16 sectors in flash memory.
Flashing time was 00:04:29. Result: OK
15/Oct/2023 09:58:32.176: LOG: Restoring Windows sleep mode.
15/Oct/2023 09:58:32.178: USER: Disconnecting...
15/Oct/2023 09:58:32.276: LOG: Sent message with service ID StopCommunication
15/Oct/2023 09:58:32.294: LOG: Received message with service ID: StopCommunicationPositiveResponse
15/Oct/2023 09:58:32.294: USER: Disconnected
15/Oct/2023 09:58:32.357: LOG: Closing FTDI device.
15/Oct/2023 09:58:32.358: LOG: Send receive thread now terminated.

I now will have to bootmode to recover ecu and want to know should i use the eeprom from the 559E ecu or my original Allroad eeprom?
Any help for anything above would be appreciated.
This may take some time due to work constraints. Cheers Veeone

Anyone flashed 559E to 4.2 Allroad??