This is the ecu file that i need to change.. forget to post in the first post..

This is impossible.
This ECU software only supports 75 coding and does not support MT configuration.
You need to replace the ECU (or completely reprogram the ECU software).

By the way, 055AA file you posted is not original. It is “tuned” but very mediocre.
Among the changes made is the prohibition of diagnostics of the second oxygen sensor.
This may be the cause of errors when downloading the original version of the MT software.
Try this SGO. This is the 5-gear MT soft closest to the hardware version of your ECU.

so i tested your file, and get the same problem i got from another sgo that i get from a database.
btw i have opened a threat aboute this issue here. https://nefariousmotorsports.com/forum/index.php?topic=22044.msg161549#msg161549

after flash the file i can change the softcode to 000071, all erros from tcu go away, traction control and cruise control work fine.. but i get 3 errors about lambda heater. like i say on my other thread.
here attached is a print from this errors.

so i also dont get a reading from the b1s1 in vcds.. and the heater its always on in the scanner.

i dont thing delete the dts its the solution here because if the ecu its not reading the lamba b1s1 it can be not sending it to ecu too and so i can have a broken engine soon.

so what are the options here?

ok now i get it, so or i get a AB hardware, thats hard to find here, or modify the AA one? so who can do this firmware corrections in the ecu for me?