Dev Blog
Forum
Wiki
About
NefMoto
>
Technical
>
Diagnostics
>
What would be considered high IAT?
Pages: [
1
]
« previous
next »
Author
Topic: What would be considered high IAT? (Read 8246 times)
marcello7x
Full Member
Karma: +1/-0
Offline
Posts: 126
What would be considered high IAT?
« on: July 13, 2012, 05:23:27 PM »
Im curious what is considered a high intake air temp?
Logged
userpike
Hero Member
Karma: +22/-1
Offline
Posts: 763
Re: What would be considered high IAT?
« Reply #1 on: August 04, 2012, 01:50:18 PM »
Quote from: marcello7x on July 13, 2012, 05:23:27 PM
Im curious what is considered a high intake air temp?
me too...I want to tune for my FMIC....
Logged
sn00k
Sr. Member
Karma: +59/-2
Offline
Posts: 277
Re: What would be considered high IAT?
« Reply #2 on: August 04, 2012, 06:13:52 PM »
well.. lower is generally better.. but i would say 25-30 deg above ambient air would be to consider HIGH.
Logged
vwaudiguy
Hero Member
Karma: +53/-37
Offline
Posts: 2024
Re: What would be considered high IAT?
« Reply #3 on: August 07, 2012, 10:34:46 AM »
I would say if IAT has the munchies or is extremely relaxed it is probably high.
Logged
"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
userpike
Hero Member
Karma: +22/-1
Offline
Posts: 763
Re: What would be considered high IAT?
« Reply #4 on: August 07, 2012, 12:33:00 PM »
Quote from: vwaudiguy on August 07, 2012, 10:34:46 AM
I would say if IAT has the munchies or is extremely relaxed it is probably high.
I have the munchies and am extremly relaxed right now..
Logged
prj
Hero Member
Karma: +1072/-481
Offline
Posts: 6037
Re: What would be considered high IAT?
« Reply #5 on: August 08, 2012, 06:42:48 AM »
Do a full third gear pull from 2000 to 7000 RPM at WOT.
Note the lowest and the highest IAT. This will be your delta.
If your delta exceeds 20 degrees, you are probably running too much boost.
As a rule of thumb you want it between 15 and 20 degrees tops.
I will probably get flamed to hell for this post, but perhaps it'll help someone.
Logged
PM's will not be answered, so don't even try.
Log your car properly
-
WinOLS database
-
Tools/patches
20VTMK1
Full Member
Karma: +0/-0
Offline
Posts: 113
Re: What would be considered high IAT?
« Reply #6 on: August 22, 2012, 03:25:37 AM »
Also , the approach temp (diff between ambient and cooler exit temp) must not be more than 20 deg C - that considered poor cooling if it's higher. Trying to get less than 20 is the law of diminishing returns as you need substantially larger area , however this causes other problems.
Good rule of thumb advice I think , WMI would assist in bringing the approach temps down further , however WMI is a band aid and not a cure
Logged
nyet
Administrator
Hero Member
Karma: +608/-168
Offline
Posts: 12270
Re: What would be considered high IAT?
« Reply #7 on: August 22, 2012, 09:35:12 AM »
I'd also make sure that on really hot days, you aren't pulling to much timing due to elevated IATs. If you are, and bigger intercoolers don't help (they often don't), then WMI or pulling boost is all you can do.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool
Please do not ask me for tunes. I'm here to help people make their own.
Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
marcello7x
Full Member
Karma: +1/-0
Offline
Posts: 126
Re: What would be considered high IAT?
« Reply #8 on: September 25, 2012, 10:27:32 AM »
Thanks for all the help guys, i didn't have a chance to get back on the forum for a while.
My issue was def high ambient 96*f+, and trying to tune for high boost W/ a tiny inter-cooler. Bigger inter-cooler and wmi was a bandaid, but i pulled some more timing and held off on increasing the boost till recently where temps have dropped here in new England.
Logged
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> Introductions
=> General Discussion
-----------------------------
Noob Zone
-----------------------------
=> Noob Questions
=> Noob Guides and FAQs
-----------------------------
Technical
-----------------------------
=> NefMoto Software
=> Tuning
===> Documents & Helpers & How To's
===> Community Projects
=> Diagnostics
=> Flashing and Chipping
=> Cluster and Immobilizer
===> ECU EEPROM images
===> Original Cluster dumps
===> Original Cluster dump requests
=> Data Logging
=> Reverse Engineering
=> Communication Protocols
-----------------------------
ECU Files
-----------------------------
=> ECU Definition Files
===> ECU Definition File Requests
=> Original ECU Files
===> Original ECU File Requests
=> Checksum Update Requests
-----------------------------
Vehicles
-----------------------------
=> Vehicle Tech
=> Project Cars
-----------------------------
Regional
-----------------------------
=> Canadian Regional Discussion
=> US Regional Discussion
-----------------------------
Classifieds
-----------------------------
=> For Sale
=> Wanted
=> Services
-----------------------------
Miscellaneous
-----------------------------
=> Off Topic
=> Forum Tech Support
=> Bizarro Messages Posted by Bots and Spammers
Navigation
Home
Help
Login
Register
Personal Tools
November 26, 2024, 04:16:27 PM
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Search
Advanced Search
Loading...