Pages: 1 [2] 3
Author Topic: 8D0907551K complete RS4 B5 WinOLS .kp /.ols with EEPROM binary and RAM variables  (Read 37600 times)
RS4boost
Full Member
***

Karma: +46/-0
Offline Offline

Posts: 125



Thomas, can you take look at this post and comment on it? Smiley

It is my little AL/NLS wish list

http://nefariousmotorsports.com/forum/index.php?topic=607.msg18118#msg18118

Yes I have read it carefully.

To implement more parameters (TMOT, misfire detection) should not be a problem, but it takes time to program it proper.
At the moment I am testing the basics of my new routines.
I wrote the codes since the last 12 month.
It takes many time, because it is only a hobby.

If all tests are successfull, we can bring in more new opcode to tune it fine.
Logged

nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW

Thank you! I can't wait to see what you've been working on.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
s5fourdoor
Hero Member
*****

Karma: +33/-3
Offline Offline

Posts: 617



Thank you! I can't wait to see what you've been working on.

seriously...  i should have results soon for the k-box bin-write.  had to help somebody move last weekend, so i didn't get a chance to try it yet...
Logged
RS4boost
Full Member
***

Karma: +46/-0
Offline Offline

Posts: 125



Hi guys,

here is a video where the car runs with the described functions.

It is on a 1/8 mile drag.

Car runs 7.434 sec with a broken fuel pump.

http://youtu.be/sVOYXcPZmd8
« Last Edit: August 15, 2012, 01:42:12 AM by RS4boost » Logged

s5fourdoor
Hero Member
*****

Karma: +33/-3
Offline Offline

Posts: 617



gtfoh... this is amazing...     Thomas - Do you use WinOLS to generate the binaries you use and then program with Nefmoto?
Logged
RS4boost
Full Member
***

Karma: +46/-0
Offline Offline

Posts: 125



gtfoh... this is amazing...     Thomas - Do you use WinOLS to generate the binaries you use and then program with Nefmoto?

I use IDA Pro and Keil uVision to generate the code,
WinOLS to implement it into the file and calculate the CS,
and a Galetto to flash it into the ECU.
Logged

Snow Trooper
Hero Member
*****

Karma: +89/-24
Offline Offline

Posts: 689


WWW

Do Q and K box have same low map limit as M box?
Logged

cartoons?
6A 61 72 65 64 40 76 6C 6D 73 70 65 63
RS4boost
Full Member
***

Karma: +46/-0
Offline Offline

Posts: 125



What do you mean with low map limit?
« Last Edit: August 15, 2012, 01:49:37 AM by RS4boost » Logged

s5fourdoor
Hero Member
*****

Karma: +33/-3
Offline Offline

Posts: 617



Hi -

I took a risk and tried starting the car with a basic q-box setup.  Here's what I did:  TVUB, KRKTE, MLHFM, MLOFS, KFMLDMX, KFMLDMN, KFKHFM, TABGSS, TABGSS2, TEMIN modified to have the same values as my running m-box interpolated correctly.  Please recall I'm running a modified M-box on a originally A-box car and have K04 turbos.

The car started up immediately four times in a row, sounded perfect and started very smoothly.  It then immediately shut-off.
This must be pedal related.  It shut off within 2, maybe even 1 second of startup.  However the RPM actually went upto about 1200 rpm and it wasn't just sputtering, it was 100% running for sure...   The car did not go into any kind of bad mode, except that it shut the hell off...  LOL.

What can be the solution to this?  I know this must be pedal related.  I was quite surprised this did not brick my ECU.  I reflashed the old m-box tune, did two startups to check, and its again like nothing happened.  I think the risk is low here, we just need to figure out the problem to convert the pedal maps.  That's my guess.  Somethings tells me snowtrooper is required.  LOL

Logged
RS4boost
Full Member
***

Karma: +46/-0
Offline Offline

Posts: 125



Circuit diagrams for S4 and RS4 added...
Logged

julex
Hero Member
*****

Karma: +78/-4
Offline Offline

Posts: 923



perhaps I missed it but did you ever post the .bin with nls etc incorporated into it?

Thanks.
Logged
s5fourdoor
Hero Member
*****

Karma: +33/-3
Offline Offline

Posts: 617



We also need to find the DTC location to control the cam switch-over for S4 users who don't intend to wire the second bank of cylinders.
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW

Amazing!

Any way you can output an older version of the mappack? like for 1.233 Sad
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
jibberjive
Hero Member
*****

Karma: +23/-2
Offline Offline

Posts: 536



Amazing!

Any way you can output an older version of the mappack? like for 1.233 Sad
I was hoping you'd chime in, possibly with some of your .kp to .xdf magic:)

EDIT: I thought this was the main M-box to K-box thread.
« Last Edit: November 19, 2012, 11:43:08 PM by jibberjive » Logged
prj
Hero Member
*****

Karma: +903/-420
Offline Offline

Posts: 5787



nyet, just fyi, my tool reads .ols files with some manual massaging to detect the first offset.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
Pages: 1 [2] 3
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.023 seconds with 16 queries. (Pretty URLs adds 0s, 0q)