Pages: [1]
Author Topic: ME7.4.6 Autocross ABS/VSS delete  (Read 569 times)
NBN
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7


« on: August 28, 2024, 07:26:20 AM »

Hey!

After successfully removing immo on a Citroen ME7.4.6 ecu the car finally runs but it refuses to rev. Seems to be some kind of limp mode showing P0501 error code, which has to do with the vehicle speed sensor.
It's kind of expected since he has removed almost everything connected in the car to prepare it for folkrace/autocross, including ABS/ECS.

I've been googling and scrolling through Ida Pro and Winols for days but i'm not sure where to begin to find anything related to the error code or VSS.

Anyone got any hints or suggestions on where to look to get the ecu to be happy without ECS/speed sensor?


All tips and pointers is appreciated as the the documentation available online for ME7.4.6 seems to be sparse.

// NBN
Logged
prj
Hero Member
*****

Karma: +1067/-476
Offline Offline

Posts: 6004


« Reply #1 on: August 28, 2024, 08:31:18 AM »

Has been covered countless times here...

NMAXDV
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
NBN
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7


« Reply #2 on: August 28, 2024, 09:46:18 AM »

Do you mind pointing me in the right direction?

There's a chance i've not been using the correct terms while searching. Trying to learn here :p
Logged
prj
Hero Member
*****

Karma: +1067/-476
Offline Offline

Posts: 6004


« Reply #3 on: August 28, 2024, 10:47:40 AM »

I told you the label you need to change, if you don't have a def for this or a similar ECU it might be somewhat difficult to find it.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
NBN
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7


« Reply #4 on: August 28, 2024, 10:58:09 AM »

Yea, that's kinda the problem. Can barely find anything for this one.

Thinking of maybe just emulating the VSS message on canbus instead.

Thank you for the symbol.

// NBN
Logged
prj
Hero Member
*****

Karma: +1067/-476
Offline Offline

Posts: 6004


« Reply #5 on: August 29, 2024, 04:18:23 AM »

On ME7 the code is very similar.
There's ME7.4.5 damos floating around at least.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)