Pages: 1 [2]
Author Topic: Experiences with 996 Porsche Turbo - ME7.8  (Read 22634 times)
prj
Hero Member
*****

Karma: +903/-420
Offline Offline

Posts: 5789


« Reply #15 on: August 22, 2012, 06:11:37 AM »

Did you choose the boot mode version of the ECU in the list?
Don't have that in the list.
Quote
Also there is a Generic menu option for Bosch ECU's and that is 100% boot mode if you need it.
That I have but did not try.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
NOTORIOUS VR
Administrator
Hero Member
*****

Karma: +58/-7
Offline Offline

Posts: 1056


« Reply #16 on: August 22, 2012, 06:14:57 AM »

I suppose not every ECU can be done in boot mode via the Mfg. category.  Try the Generic drop down in that case.
Logged

SCHNELL ENGINEERING BLOG ·  STANDALONE ECUS · TUNING · DYNO · WIRING · PARTS · VEMS
Google Talk: NOTORIOUS.VR
n00bs start here: http://s4wiki.com/wiki/Tuning
Rick
Hero Member
*****

Karma: +62/-4
Offline Offline

Posts: 704


« Reply #17 on: September 08, 2012, 01:34:57 AM »

MPPS does work in boot mode, but you need to choose it in the Generic selection Smiley
Logged
malec
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 16


« Reply #18 on: January 16, 2014, 02:45:47 AM »

Hi!

How did you manage with checksums on this ECU?

Does the ME7Logger works with this ECU?

Regards!
Logged
dream3R
Hero Member
*****

Karma: +18/-8
Offline Offline

Posts: 1194


« Reply #19 on: January 16, 2014, 05:24:42 AM »

Mpps boot mode works fine for Volvo ME7 btw.
Logged



How to work out values from an A2L Smiley

http://nefariousmotorsports.com/forum/index.php?topic=5525.msg52371#msg52371


Starting Rev's http://nefariousmotorsports.com/forum/index.php?topic=5397.msg51169#msg51169

noobs read this before asking http://nefariousmotorsports.com/forum/index.php?topic=9014.0title=


ORGORIGINAL 05 5120 creator for Volvo
ORIGINAL Datalogger (Freeware) Author
ORGINAL finder of the 'extra' torque' limits
I don't have ME7.01 A2L I just use ID
engine_nerd
Newbie
*

Karma: +3/-1
Offline Offline

Posts: 19


« Reply #20 on: May 04, 2014, 11:35:15 AM »

Did that ORI work out? I've got a chipped 996tt that is already tuned. I want to change a few things hardware wise so I will need to start over... These days even finding a stock flash 996tt to pull the file off is not so easy haha.
Logged
dream3R
Hero Member
*****

Karma: +18/-8
Offline Offline

Posts: 1194


« Reply #21 on: May 20, 2014, 12:00:26 AM »

I've used minimon to manually pull a file from a tuned ecu before, worked perfect.
Logged



How to work out values from an A2L Smiley

http://nefariousmotorsports.com/forum/index.php?topic=5525.msg52371#msg52371


Starting Rev's http://nefariousmotorsports.com/forum/index.php?topic=5397.msg51169#msg51169

noobs read this before asking http://nefariousmotorsports.com/forum/index.php?topic=9014.0title=


ORGORIGINAL 05 5120 creator for Volvo
ORIGINAL Datalogger (Freeware) Author
ORGINAL finder of the 'extra' torque' limits
I don't have ME7.01 A2L I just use ID
ported2flow
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 76


« Reply #22 on: June 22, 2014, 04:30:50 AM »

Heheh dream3R I can confirm that!!!
Takes a little bit read out time but works like a charm Smiley
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 17 queries. (Pretty URLs adds 0s, 0q)