Pages: 1 2 [3] 4
Author Topic: m box XDF error?  (Read 51807 times)
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #30 on: January 21, 2011, 12:32:01 PM »

Will dig into it again. TunerPro consistently crashed on that map for me.

(Edit) I noticed in the past that when the labels are there TunerPro is happy reading it, but still crashes.

(Had zero seconds to breathe today and now I am spent and ready for bed.)

Its a known problem with tuner pro

switch it from 512x1 to 1x512 and it won't crash
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #31 on: January 21, 2011, 12:34:59 PM »

Hiya.  It's the RPM axis in the timing maps.  Some maps use 8bit axis and some use 16 bit rpm axis.  

I'll put together a matrix of ME7 timing map name and the axis locations for the M box.  

For starters, in the M ecu, KFZW and KFZW2 have axis at file offsets:

X axis: 0x100FF
Y axis: 0x100C2

Spen have you found any other discrepancies.

For example, KFZOP/OP2, KFZWMS (all were using 12b04)

these are adjacent to the map, so i assume they are ok:
DZWTIN (was using 15222)
KFZWMN (was using 16b0c)
KFZWMNST (was using 16bf4)
KFSZT (was using 1a417)


I assume scale/offset is 40/0
« Last Edit: January 21, 2011, 12:49:23 PM by nyet » Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #32 on: January 22, 2011, 06:43:54 PM »

Updated my xdf.

Spen, i would appreciate your feedback!

http://www.nefariousmotorsports.com/forum/index.php?topic=200.msg2224#msg2224
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
FR Wilk
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 11


« Reply #33 on: February 11, 2011, 11:19:33 PM »

possible error?   Shocked

KFZWWLNM   X and Y address are the same?
XAddress         =0x10122
YAddress         =0x10122
« Last Edit: February 12, 2011, 03:52:54 AM by FR Wilk » Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #34 on: February 12, 2011, 04:13:47 PM »

possible error?   Shocked

KFZWWLNM   X and Y address are the same?
XAddress         =0x10122
YAddress         =0x10122


Thank you! That definitely looks suspect. Does anbody have any idea what those should be?

My guess would be Y = 10097
« Last Edit: February 12, 2011, 04:16:09 PM by nyet » Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
FR Wilk
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 11


« Reply #35 on: February 12, 2011, 06:11:15 PM »

Also, there are 4 maps "KFDLUR" at
10333
10373
103B3
103F3

There are another 4 that appear to have the same axis as the above.
1022A
1026A
102AA
102EA
Any ideas what they do? Names?
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #36 on: February 12, 2011, 08:41:38 PM »

Sort of pointless do go about it that way. There are thousands of maps. Deciphering what an unknown map does is silly compared to trying to locate a map that you know does something you want to change.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
iznogoud
Full Member
***

Karma: +13/-0
Offline Offline

Posts: 104

Learning junkie


« Reply #37 on: February 12, 2011, 08:53:35 PM »

(Glad to know this thread is not dormant.)

Nyet, I tried getting mesim. I think I emailed you about it. Now sure how to get this running or which of the files bundles to get. Help!
Logged

Audi S4 B5 2000 6sp Cactus Green
Audi A4 B6 Avant 1.8T 2001.5 5sp Santorin Blue
spen
Full Member
***

Karma: +43/-0
Offline Offline

Posts: 112


« Reply #38 on: March 04, 2011, 07:25:29 AM »

Nyet

I'll check those axes for you.  I had to take a break from the internet for a while hence the slow response.

Spen
Logged
spen
Full Member
***

Karma: +43/-0
Offline Offline

Posts: 112


« Reply #39 on: March 04, 2011, 08:03:39 AM »

For example, KFZOP/OP2, KFZWMS (all were using 12b04)

KFZWOP rpm axis = SNM16OPUW, 16 words stating at 812B04 (axis length at 0x812B02 {program counter 0x805EF8}
KFZWOP2 is the same



these are adjacent to the map, so i assume they are ok:
DZWTIN (was using 15222) - 1d table scale at 0x815222 {program counter 0x8631A6}
KFZWMN (was using 16b0c) - Internal scales adjacent to the data -0x816B0C, 0x816B1C {program counter 0x88AACC}
KFZWMNST (was using 16bf4) - Internal scales adjacent to the data -0x816BF4, 0x816C04 {program counter 0x88AB76}
KFSZT (was using 1a417) - haven't found this one yet.
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #40 on: March 04, 2011, 02:10:07 PM »


KFZWOP rpm axis = SNM16OPUW, 16 words stating at 812B04 (axis length at 0x812B02 {program counter 0x805EF8}
KFZWOP2 is the same



spen, thank you so much. I have changed my map pack. I don't know if i'll release an update just yet; i'll probably wait for a few more corrections first.


OH and please look for KFZWMS Smiley

thanks in advance.
« Last Edit: March 04, 2011, 02:22:40 PM by nyet » Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Rick
Hero Member
*****

Karma: +62/-4
Offline Offline

Posts: 704


« Reply #41 on: March 22, 2011, 02:32:51 PM »

Nyet,

rpm axis data for timing map in the last xdf you posted look like garbage?

Rick
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #42 on: March 22, 2011, 05:21:31 PM »

Nyet,

rpm axis data for timing map in the last xdf you posted look like garbage?

Rick


12b04 (SNM16OPUW)? Looks fine in winols, but the xdf is autogeneratead, perhaps there was a translation error.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Rick
Hero Member
*****

Karma: +62/-4
Offline Offline

Posts: 704


« Reply #43 on: March 23, 2011, 06:52:42 AM »

Probably, not looked at the .kp.

How much of a difference is there between the old incorrect axis values and incorrect?

Old one went from 400 to 6500rpm I think?

Rick
Logged
spen
Full Member
***

Karma: +43/-0
Offline Offline

Posts: 112


« Reply #44 on: March 28, 2011, 07:25:09 AM »


Here is KFZWMS in xdf format for the M rom:

%%TABLE%%
   000002 UniqueID         =0x0
   000100 Cat0ID           =0x8
   040005 Title            ="Map with permanent latest possible ignition angle (KFZWMS)"
   040011 DescSize         =0x32
   040010 Desc             ="Map with permanent latest possible ignition angle"
   040100 Address          =0x11bb0
   040150 Flags            =0x301
   040200 ZEq              =0.750000 * X,TH|0|0|0|0|
   040230 RangeLow         =0.0000
   040240 RangeHigh        =255.0000
   040300 Rows             =0x10
   040305 Cols             =0xc
   040320 XUnits           ="%"
   040325 YUnits           ="Upm"
   040330 ZUnits           ="grad KW"
   040350 XLabels          =0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
   040352 XLabelType       =0x1
   040354 XEq              =0.750000 * X,TH|0|0|0|0|
   040360 YLabels          =0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00
   040362 YLabelType       =0x1
   040364 YEq              =40.000000 * X,TH|0|0|0|0|
   040505 XLabelSource     =0x1
   040515 YLabelSource     =0x1
   040600 XAddress         =0x100ff
   040610 XDataSize        =0x1
   040620 XAddrStep        =1
   040650 XOutputDig       =0x0
   040660 XAxisMin         =1000.000000
   040670 XAxisMax         =1000.000000
   040700 YAddress         =0x100c2
   040710 YDataSize        =0x1
   040720 YAddrStep        =1
   040750 YOutputDig       =0x0
   040760 YAxisMin         =1000.000000
   040770 YAxisMax         =1000.000000
%%END%%

The other axis which Rick says is garbage, isn't.  The data is wide, and I suspect the full xdf has it as bytes.

Spen
Logged
Pages: 1 2 [3] 4
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.023 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)