Pages: [1] 2 3
Author Topic: ME7.1.1 R32 XDF Definition file - 022906032CP 6463 0261207885 371754  (Read 21942 times)
aminder
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5



Hi Guys,

Can someone send me a Definition file (XDF) as per title. Been looking around and can't seem to locate.

Many thanks

Aminder
Logged
prj
Hero Member
*****

Karma: +903/-420
Offline Offline

Posts: 5788


« Reply #1 on: October 30, 2012, 08:24:15 AM »

I can make you one, but I am not going to do this for free...
Logged

PM's will not be answered, so don't even try.
Log your car properly.
aminder
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5


« Reply #2 on: October 30, 2012, 08:49:12 AM »

How much? and what do you require?
Logged
aminder
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5


« Reply #3 on: October 30, 2012, 08:54:09 AM »

Was hoping someone had already done this - is there some guide to attempt to do this myself? Would be interested in learning the process.
Logged
prj
Hero Member
*****

Karma: +903/-420
Offline Offline

Posts: 5788


« Reply #4 on: October 30, 2012, 09:03:32 AM »

I'll PM.

As for a guide - unlikely. There is not a guide for everything.
If you can't figure it out with a hex editor and ida pro, then you will just not figure it out...
Logged

PM's will not be answered, so don't even try.
Log your car properly.
aminder
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5


« Reply #5 on: October 30, 2012, 09:30:29 AM »

Thanks will await you IM.


Logged
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2177


« Reply #6 on: March 21, 2017, 05:26:51 AM »

Hi guys,

I hate asking for handouts, but I couldn't get the R32 file on here to offset against the CP.  Does anyone have any definition files for the CP? 

Also, any advice for gains?  They've got a horrendous flat spot as stock and I'd like to remove it.  I guess IRL/IOP is dead in the midrange.  KFPED could do with being less sensitive too.
Logged
RBPE
Sr. Member
****

Karma: +40/-5
Offline Offline

Posts: 394



« Reply #7 on: April 04, 2017, 08:03:03 AM »

I did a partial def file on it at least ages ago, probably did virtually a full one - files all over different hard drives at the mo, I've also just uploaded a csv from a mk5 I got from the "Nefmoto 10,000+" thread (I think -  if it's a file in those links for ME7.1.1. I've probably done something on it for def).

Drop us a message or post up a few map/function locations you're after if you need me to post a csv of the locations of them.
Logged
prj
Hero Member
*****

Karma: +903/-420
Offline Offline

Posts: 5788


« Reply #8 on: April 04, 2017, 09:12:00 AM »

The throttle is WOT all the time with stock tune, it's got nothing to do with it.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2177


« Reply #9 on: April 04, 2017, 10:21:22 AM »

I couldn't get anything to line up.  Must be going crazy. I'll have a look again, but I wasn't successful at all.

What causes the flat spot?
Logged
Mikhail
Full Member
***

Karma: +2/-4
Offline Offline

Posts: 136


« Reply #10 on: April 04, 2017, 10:03:02 PM »

Set lamda 0.85, test what a bit more ignition advance would do, test cam advance/retard, test intake manifold flap switch rpm.
Logged
vwdubNam
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 27


« Reply #11 on: July 23, 2018, 12:18:39 PM »

please find attached.

im still figuring things out. i downloaded winols and tunerpro. so if i have this correct, its the difinition file that i import that shows me where everything is? correct?

i want to try a crackle and pop
and post cat sensor delete

please checksum my post, where needed!
Logged
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2177


« Reply #12 on: July 23, 2018, 01:52:17 PM »

In for replies.  I can't define the CP.  It gives me a headache.
Logged
vwdubNam
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 27


« Reply #13 on: July 23, 2018, 11:27:40 PM »

In for replies.  I can't define the CP.  It gives me a headache.
Im not entirely sure how to assist in the CP?
Im not sure if the car has had an ecu changed before, as its a restoration project of mine. so what are the options of CP abbreviations?
Logged
vwdubNam
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 27


« Reply #14 on: July 24, 2018, 07:22:35 AM »

BUMP! help
Logged
Pages: [1] 2 3
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.074 seconds with 17 queries. (Pretty URLs adds 0.009s, 0q)