Yeah let me see if I can update your XDF with my changes.

if someone needs it
Email-Information from Bosch Automotive Aftermarket
Map sensors data sheet

-> 0281002316
-> 0281006059/02810060
-> 0281002401

Open msnpcv and you'll see why. 

1bf68 is correct.
If you knew the method I used to create this .xdf, the reason for errors would become clear.

Hey in your XDF under KWP1281 Patch
"pvdks_w" address="0x83320" "E6F81200 E7FEFA00"  to "E6F80800 E7FEFC00"
"pvdkds_w" address="0x856F0" "E6F81200 E7FEFA00"  to "E6F80800 E7FEFC00"
"ps_w" address="0x834BE" "E6F81200 E7FEFA00"  to "E6F80800 E7FEFC00"
"plsol" address="0x83310" "E6F81200 E7FEFA00"  to "E6F80800 E7FEFC00"

this is no working for my on my RS4 with 3bar map sensor an 5120 hack.

with no KWP1281 Patch all work ok, vcds thay ~500mbar in idle (baro,ps,plsol)
with your KWP1281 Patch is ps and plsol in idle 1250mbar

I have a thinking error?

I must have overlooked something.
Car is running a bit nervous, jerky and is ultra sensitive on little accelpedal moves.
On wot it drives like normal and everything looks fine from the logs.
At the beginning of the logs there is a difference in desired lambda, i think because of AC on in one of the runs.

Lambdacontrol goes crazy in the 5120. What is wrong here?

attached both logs, one with 5120, one without, same day, same time

thx in advance

anyone willing to support here?

thx alot