Pages: [1]
Author Topic: 7.1.1 immo-off  (Read 12008 times)
ddillenger
Moderator
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« on: February 25, 2013, 09:23:40 PM »

This file will work in allroads/a6's equipped with the BEL engine and ME7.1.1 ecu. File is off, and vin/immo id fields have been filled with placeholders (your vin here/immo id here). Flash as is, or use a hex editor to insert your vin.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
ecufix
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #1 on: January 22, 2014, 05:27:57 AM »

thank you very good ! Grin
Logged
stuklr
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 147


« Reply #2 on: February 27, 2014, 11:22:16 PM »

Hey DD, if I open this in the hex editor in tunerpro, can I just FF out the "Your Vin Here" without consequences? Are there checksum's that need fixed if its gets FF'd?

Tunerpro's hex editor lets me do it, but I haven't been able to test the results. Thanks
Logged
stuklr
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 147


« Reply #3 on: February 27, 2014, 11:27:25 PM »

I attached the file. Really wish I had a better way of editing these. What program is best? WinOLS?
Logged
ddillenger
Moderator
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #4 on: February 27, 2014, 11:27:42 PM »

Yes, there are checksums! Somewhere around here is 95040check.exe which will fix the sums.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
stuklr
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 147


« Reply #5 on: February 27, 2014, 11:51:16 PM »

Found it in the immo thread. Thanks
Logged
marrakech
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 30


« Reply #6 on: July 30, 2014, 10:13:03 PM »

Thanks!
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 17 queries. (Pretty URLs adds 0s, 0q)