Pages: [1]
Author Topic: Fartstrup ECU  (Read 11985 times)
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1600


« on: February 28, 2013, 03:08:33 AM »

Looks like a aftermarked plug and play ecu for me7.x

Did someone already had contact with the ecu?



Logged
littco
Hero Member
*****

Karma: +52/-7
Offline Offline

Posts: 903


« Reply #1 on: February 28, 2013, 09:29:41 AM »

Looks like a aftermarked plug and play ecu for me7.x

Did someone already had contact with the ecu?




is that a sd card?
Logged
Snow Trooper
Hero Member
*****

Karma: +90/-24
Offline Offline

Posts: 689


WWW
« Reply #2 on: February 28, 2013, 11:37:03 AM »

on board logging
Logged

cartoons?
6A 61 72 65 64 40 76 6C 6D 73 70 65 63
Snow Trooper
Hero Member
*****

Karma: +90/-24
Offline Offline

Posts: 689


WWW
« Reply #3 on: February 28, 2013, 11:38:34 AM »

this and the link me7.5 PnP ecu have always intrigued me.
Logged

cartoons?
6A 61 72 65 64 40 76 6C 6D 73 70 65 63
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #4 on: February 28, 2013, 11:40:02 AM »

INTERESTING.

More info anybody?
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
vdubnation
Turboman
Global Moderator
Sr. Member
*****

Karma: +49/-2
Offline Offline

Posts: 433


« Reply #5 on: February 28, 2013, 11:44:15 AM »

Logged
jooo
Jr. Member
**

Karma: +0/-1
Offline Offline

Posts: 30


« Reply #6 on: February 28, 2013, 11:48:10 AM »

How come the big enthusiasm?  Huh  Tongue
It's a standalone unit just like the rest on the market.
The ONLY difference is the board size and connector, probably to be able to "hide" it in a standard Motronic alucasing and depending on which VAG car it might be pin compatible with standard harness.

btw, a link for lazy guys http://www.fartstrup.dk
« Last Edit: February 28, 2013, 11:56:12 AM by jooo » Logged
madswp
Full Member
***

Karma: +3/-0
Offline Offline

Posts: 102



« Reply #7 on: February 28, 2013, 11:56:08 AM »

Very popular plug'n play ecu here in denmark on VAG machines. it is totally plug´n play with original wiring harness and sensors used og ex 1.8t. main reason people decides to change from me7 is to get rid of the MAF.  a friend of mine is making 440hp on his 1.8t with fmj/fartstrup ECU. runs perfectly - but if it is better than me7? guess its up to how proff the tuner is Wink

you can download the control software on thier website. its an old DOS based system. but works fine
« Last Edit: February 28, 2013, 12:09:15 PM by madswp » Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #8 on: February 28, 2013, 11:59:29 AM »

thats the best name they could decide on?  Tongue
Logged
Snow Trooper
Hero Member
*****

Karma: +90/-24
Offline Offline

Posts: 689


WWW
« Reply #9 on: February 28, 2013, 12:06:14 PM »

Vi-PEC / Link Me7.5 setup









"This plug-and-play ECU is based off of the V88 unit, with many of the same useful features. These have very flexible control fuctions to control all of your inputs/outputs, and allow you to design your own functions to control them. This unit can precisely control injectors and ignition at low or high RPM and low or high manifold pressures. These have a very high level of protection from interferance built into the ECU to ensure smooth running even at the most extreme conditions. This unit can control variable cam timing for up to four camshafts, with cam position from full advance to full retard in less than one second. The built in closed loop idle support will make for OEM like idle stability. Boost can easily be controlled as well, even boost-by-gear. These ECUs also have features like antilag, flatshift, launch control, and traction control. All OEM features (including DBW throttles) are supported with this unit, making it truly "plug-and-play". The billet aluminum case uses the same mounting location as the factory ECU, so no extra brackets are needed.

Features:

Ignition control to 0.1 degree, fuel to 0.01 MS
Sequential injection
Four ignition outputs
Eight coil dwell, software selectable
Spare injector and ignition outputs can be used for output control
Individual cylinder knock control with support for two sensors
Internal 4 bar map sensor
Support for air flow meters
Stepper, 2 wire, and 3 wire idle valve support
Internal baro sensor
Internal controller for electronic throttle
Support for reluctor and hall cam and crank sensors
5D fuel mapping
Many correction tables
Programmable filtering and arming thresholds
Fan control
Configurable and preset trigger options
Digital trigger decoding

Inputs/Outputs

8 auxiliary outputs
6 digital inputs
3 temperature inputs
6 analog inputs
2 knock inputs

Kit includes: Plug-and-play ECU, USB cable, manual

These ECUs are a direct replacement for all drive by wire ME7 1.8T ECUs found in 2000-2005 Golf/Jetta/TT/B5 A4. We have not confirmed compatibility with B6 A4 with electronic thermostat."
Logged

cartoons?
6A 61 72 65 64 40 76 6C 6D 73 70 65 63
madswp
Full Member
***

Karma: +3/-0
Offline Offline

Posts: 102



« Reply #10 on: February 28, 2013, 12:06:35 PM »

thats the best name they could decide on?  Tongue

the developer of the ECU is named Fartstrup as his last name  Cool regular danish word
Logged
NOTORIOUS VR
Administrator
Hero Member
*****

Karma: +58/-7
Offline Offline

Posts: 1056


« Reply #11 on: March 14, 2013, 01:29:44 PM »

How come the big enthusiasm?  Huh  Tongue
It's a standalone unit just like the rest on the market.
The ONLY difference is the board size and connector, probably to be able to "hide" it in a standard Motronic alucasing and depending on which VAG car it might be pin compatible with standard harness.

btw, a link for lazy guys http://www.fartstrup.dk

Just wanted to touch on this... Yesterday I met Kenneth from ktech.dk... he is trying to get this ECU on the market... very nice guy and the ECU is a very impressive piece. It easily is the best PnP replacement ECU for ME at this time, even better then the Vipec. 

With the Fartstrup you get to keep ESP/ASR, etc.. You can even use your OE immobilizer... It has Bluetooth, CAN/OBDII communications protocols. 

I held in my hands the unit/board pictured in the OP, the quality was outstanding.
Logged

SCHNELL ENGINEERING BLOG ·  STANDALONE ECUS · TUNING · DYNO · WIRING · PARTS · VEMS
Google Talk: NOTORIOUS.VR
n00bs start here: http://s4wiki.com/wiki/Tuning
DonSupreme
Newbie
*

Karma: +3/-1
Offline Offline

Posts: 22


« Reply #12 on: March 14, 2013, 04:38:04 PM »

Regarding OBDII.

Can you pass emissions e-test with this unit?
Logged
NOTORIOUS VR
Administrator
Hero Member
*****

Karma: +58/-7
Offline Offline

Posts: 1056


« Reply #13 on: March 15, 2013, 06:02:16 AM »

Regarding OBDII.

Can you pass emissions e-test with this unit?

Not at this time I believe no.
Logged

SCHNELL ENGINEERING BLOG ·  STANDALONE ECUS · TUNING · DYNO · WIRING · PARTS · VEMS
Google Talk: NOTORIOUS.VR
n00bs start here: http://s4wiki.com/wiki/Tuning
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.03 seconds with 17 queries. (Pretty URLs adds 0s, 0q)