mushtafa
Full Member
Karma: +3/-4
 Offline
Posts: 121
|
 |
« Reply #165 on: July 06, 2014, 11:48:58 AM »
|
|
|
My KKL I have doesn't seem to work correctly so need a new one. I assume I stick the ECU in boot mode, connect Nefmoto in boot mode, than flash another file like normal?
|
|
|
|
|
Logged
|
|
|
|
UM-Olli-92
Full Member
Karma: +0/-0
Offline
Posts: 55
|
|
« Reply #166 on: July 13, 2014, 03:28:37 AM »
|
|
|
Hello Guys, first of all: this is a very interesting and useful thread ! Thanks very much for sharing this information.  My car is a 1999 Audi S3 1.8T. It is remapped to 260 HP. I want to add the LC function to my ECU. I read a lot about burned ignition coils in this thread. I don't want to burn my coils....  So my question is if anyone of you can tell me, if my ECU has the "good" or "bad" coil driver. I attached a pic of my ECU and the bin-file of it. Thanx very much ! Oliver |
|
|
|
|
Logged
|
|
|
|
UM-Olli-92
Full Member
Karma: +0/-0
Offline
Posts: 55
|
|
« Reply #167 on: August 18, 2014, 11:12:58 AM »
|
|
|
I tried by myself to implement the Anti Lag and NLS code. Here is the log of mazer.gti's launch.exe C:\Dokumente und Einstellungen\Administrator\Desktop\Mein S3\LC>launch.exe 018n.bin 018n.ecu 0x76980 0x16f90
finding tsrldyn...
found: 380C33
finding vfil_w...
found: 380CB6
finding nmot_w...
found: 00F874
finding wped...
wped not found, using dwped + 2: 380A5C
finding B_kuppl (clutch pedal)...
found: 00FD42.11
finding b_br (brems), brake pedal...
found: 00FD42.7
Memory Layout: 29F400 Found
FTOMN found: 1636d
FTOMN IS: 05
FTOMN CHANGED TO 0x00
Using space given by argument for code cave..
space located at: 0x76980
Using space given by argument for launch control configuration variables..
space located at: 0x16f90
using 0x384FF0 for NLS Counter variable
Finding the offset for call to the code cave..
call will be located at: 0x754d8
Writing lines of code
code writed successfully to 018n_mod.bin!!
REMEMBER TO MAKE CHECKSUMS BEFORE YOU PUT THIS FILE,
CHECKSUMS ARE NOT CALCULATED ON THIS FILE After that I changed FTOMN from 0 to 1, like fmbaldani on page 11 did and corrected the checksums with WinOLS. Then I used my Galletto 3 V53 to copy the file to my ECU. Very excited I startet my test drive, but..... NOTHING. Can you guys help me and tell me what I did wrong ? Do I have to change manualy: LaunchRPM IgnitionCutDuration RPMThreshold AccPedalThreshold SpeedThreshold ? Or is this already been done by mazer.gti's launch.exe ? If I have to change it, how can I find them ? |
|
|
|
« Last Edit: August 18, 2014, 11:21:53 AM by UM-Olli-92 »
|
Logged
|
|
|
|
maZer.GTi
Full Member
Karma: +68/-6
Offline
Posts: 246
|
|
« Reply #168 on: August 18, 2014, 01:01:32 PM »
|
|
|
Im sorry for you, this version doesnt support the Narrow Band 1.8T Ecus.
|
|
|
|
|
Logged
|
|
|
|
UM-Olli-92
Full Member
Karma: +0/-0
Offline
Posts: 55
|
|
« Reply #169 on: August 18, 2014, 02:15:58 PM »
|
|
|
|
|
|
|
|
Logged
|
|
|
|
maZer.GTi
Full Member
Karma: +68/-6
Offline
Posts: 246
|
|
« Reply #170 on: August 18, 2014, 04:33:59 PM »
|
|
|
|
|
|
|
|
Logged
|
|
|
|
UM-Olli-92
Full Member
Karma: +0/-0
Offline
Posts: 55
|
|
« Reply #171 on: August 20, 2014, 02:07:21 PM »
|
|
|
I tried manualy, but unfortunately with the same result.
And as I understand, the whole proces your script has implemented everything right.
I checked it and it looked ok....
Is it impossible to implement LC/NLS on narrowband ME7.5 like my Audi S3 APY ECU ?
|
|
|
|
|
Logged
|
|
|
|
UM-Olli-92
Full Member
Karma: +0/-0
Offline
Posts: 55
|
|
« Reply #172 on: August 20, 2014, 02:26:03 PM »
|
|
|
finding tsrldyn...
found: 380C33
finding vfil_w...
found: 380CB6
finding nmot_w...
found: 00F874
finding wped...
found: 380A5C
finding B_kuppl (clutch pedal)...
found: 00FD42.11
finding b_br (brems), brake pedal...
found: 00FD42.7
Memory Layout: 29F400 Found
FTOMN found: 1636d
FTOMN IS: 05
FTOMN CHANGED TO 0x00
Using space given by argument for code cave..
space located at: 0x76980
Using space given by argument for launch control configuration variables..
space located at: 0x16f90
using 0x384FF0 for NLS Counter variable
Finding the offset for call to the code cave..
call will be located at: 0x754d8
Writing lines of code
code writed successfully to 018n_mod.bin!!
REMEMBER TO MAKE CHECKSUMS BEFORE YOU PUT THIS FILE,
CHECKSUMS ARE NOT CALCULATED ON THIS FILE I tried with FTOMN 1 and 0. --> no difference |
|
|
|
|
Logged
|
|
|
|
fmbaldani
Newbie
Karma: +0/-0
Offline
Posts: 11
|
|
« Reply #173 on: October 07, 2014, 09:42:23 AM »
|
|
|
My ecu is: 8L0906018N 512kb on a S3 8L 1.8T I tried the standard program, but the revs kept rising up till fuel cut (7100rpm). Fried 1 coil that same day. I read somewhere that using FTOMN = 00 causes some kind of bug on this specific ecu code, so I tried using 01 instead... guess what? Now it pops like it should  https://www.youtube.com/watch?v=pwlemcKOgzMThanks a lot for the script! Just to let you guys know... Been using FTMON = 02 for quite a while now, very frequently. Had any issues so far, no fried coils, everything works just great. |
|
|
|
|
Logged
|
'03 Audi S3 225 - FMIC / Big turbo / E100
|
|
|
norbi
Jr. Member
Karma: +0/-0
Offline
Posts: 25
|
|
« Reply #174 on: October 09, 2014, 02:50:45 AM »
|
|
|
UM-Olli-92 check your sensor under the pedals (vcds, 6th group). I tested script on 3 me7 cars and works perfectly! Thank's!  |
|
|
|
|
Logged
|
|
|
|
|
elRey
|
|
« Reply #175 on: October 15, 2014, 01:53:13 PM »
|
|
|
Hello Folks, now i have a big update for the 29F400 Ecus.
+ added support for 29F400 Ecus like S3 ( 018K, 018N ).
+ added support for VR6 Ecus ( FTOMN issue )
Should work, if someone can try and give me feedback?
Usage is still the same, here is example
launch.exe ecubinary variables.ecu [offset_lc_func] [offset_lc_config]
launch.exe 018n.bin 018n.ecu 0x76980 0x16f90
ATTENTION: i noticed that many times my tool is writing the LC_FUNC_CODE and LC_CONFIG in a checksum area.
After patching your ecu binary please fix the checksum and check the functions,
the LC_FUNC_CODE should start with 9A ... and end with DB 00.
The LC_CONFIG is by default starting with A6 01 .... ending with 55 E6.
Verify that no checksum correction will overwrite the code.
greets
file attached -> PHP_LC_NLS_Version_0.5.zip (2859.71 KB - downloaded 128 times.)
Is this the latest, public version of the script? Also, please verify the default settings: LC RPM = 4500 LC vehicle speed threshold = 3.30 km/h NLS pedal threshold = 90% NLS RPM threshold = 5500 LC/NLS ign cut duration = 0.5s (500ms) Thanks, Rey |
|
|
|
« Last Edit: October 15, 2014, 03:23:40 PM by elRey »
|
Logged
|
|
|
|
|
vwnut8392
|
|
« Reply #176 on: October 19, 2014, 04:01:01 PM »
|
|
|
When i run launch.exe it just scrolls a bunch of code, what am i doing wrong?
|
|
|
|
|
Logged
|
|
|
|
maZer.GTi
Full Member
Karma: +68/-6
Offline
Posts: 246
|
|
« Reply #177 on: October 19, 2014, 05:45:53 PM »
|
|
|
When i run launch.exe it just scrolls a bunch of code, what am i doing wrong?
Post here what you entered in your command line and dont forget to include the arguments. And attach the output of the script. Maybe you try to using it wrong. |
|
|
|
|
Logged
|
|
|
|
|
adam-
|
|
« Reply #178 on: October 21, 2014, 07:27:01 AM »
|
|
|
I bet you've just launched the exe and not put it into a command, or read any of this thread.
I got it to work after only an hour of reading and some debugging.
|
|
|
|
|
Logged
|
|
|
|
|
ktm733
|
|
« Reply #179 on: October 21, 2014, 07:50:18 PM »
|
|
|
so after hours of reading i'm stuck. so i created an ecu file with meflogger. put that file into the php file. then i grab my ecu file that I got from boot mode and put that in the php file also and of course I renamed them. then I open up cmd. from cmd I drag and drop launch file. the hit enter, from there I do ask the example says so
after users user I type php launch.php ecu.bin dump.ecu with spaces
I'm probably stupid and it's something simple but I'm stumped. thanks in advance!
|
|
|
|
|
Logged
|
|
|
|
|
